PE-68049 PULSE ELECTRONICS CORPORATION, PE-68049 Datasheet - Page 2

• Manufacturer Part Number: PE-68049
• Description: Audio & Signal Transformers QUAD MOD
• Manufacturer: PULSE ELECTRONICS CORPORATION

Specifications of PE-68049

• Frequency Range: 5 MHz to 200 MHz
• Isolation Voltage: 1500 Volts
• Operating Temperature Range: 0 C to + 70 C
• Termination Style: SMD/SMT
• Dimensions: 28.58 mm L x 16.26 mm W x 5.84 mm H
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

10BASE-T QUAND SMT
TRANSFORMER MODULES
Pulse’s 10BASE-T Quad SMT transformer modules are designed to
interface with transceiver chips offered with internal wave shaping and
filtering. Pulse developed the modules working closely with IC chip vendors
for this “filter-on-chip” application such as: AMD, Crystal, Level One,
National Semiconductor and Texas Instruments. The Pulse modules are
available with varying turns ratios optimized for available transceiver chips.
A cross-reference table listing chip vendor and part number by Pulse part
number is illustrated below.
The Pulse modules offer different levels of electrical performance to meet
all applications.
The Pulse PE-68065L contains transmit and receive isolation transformers
to maintain signal integrity, suppress common mode noise, and supply
equipment isolation per the IEEE 802.3 standard.
The Pulse PE-68062LNL and E5002NL provide transmit and receive isolation
transformers as well as the high impedance common mode chokes. The
common mode chokes are incorporated for added EMI suppression and are
often necessary for FCC and CISPR 22 Class B certification.
The Pulse PE-68051 also provides transmit and receive transformers,
transmit chokes and includes a low pass filter on each transmit path. This
added transmit filtering when combined with the internal filtering of the IC
improves the attenuation for designers striving to achieve compliance with
the IEEE 802.3 standard.
In typical multiport applications, many channels are in close proximity. User
compliance with FCC/CISPR 22 Class B requirements can be achieved
www.pulseeng.com
Application Notes
Part Number
PE-68051
PE-68062LNL
PE-68065L
E5002NL
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
Pulse
eIMR
AMD’s QuIET
QuEST
TM
Yes
, eIMR+
—
—
—
TM
TM
TM
Semiconductor’s
CS8904
Crystal
Yes
Yes
—
—
IC Manufacturers
2
by applying rigorous design guidelines to suppress noise mechanisms.
Attention to high-frequency signal paths, good PCB grounding techniques,
and component placement are critical. Refer to the suggested layout on
page 8.
All eight modules are encapsulated in a 40-pin surface mountable package.
Mechanical features include:
1. Lightweight - approximately 4 grams for rapid pick-and-place.
2. Compliant leads - provide excellent solder joint reliability.
3. Low profile - under 6 mm to accommodate industry standard pick and
4. Compact form factor - footprint allows the user to lay out four ports
Modules are packaged in tubes unless Tape & Reel is specified. Please
add the suffix “T” such as PE-68049LT for Tape & Reel packaging, in
increments of 250 pieces.
Pulse also offers a full line of 10Base-T filter modules, designed to IEEE
specifications. We provide other pin-out configurations within this package.
For more information, please contact one of the locations listed on the back
page of this data sheet or check the Product Finder on the Pulse Web site
at http://www.pulseeng.com.
place equipment capabilities.
within the space of two double-stacked RJ-45 connectors or a total of 12
ports to a high density 50-pin connector.
and LXT 914
Level One’s
LXT901/944
Yes
Yes
—
—
Semiconductor’s
DP 83953
National
Yes
—
—
—
Instrument’s
TNETE2004
EC101.D (5/09)
Texas
Yes
Yes
—
—