R0E572800VKK00 Renesas Electronics America, R0E572800VKK00 Datasheet - Page 47

• Manufacturer Part Number: R0E572800VKK00
• Manufacturer: Renesas Electronics America

Specifications of R0E572800VKK00

• Lead Free Status / RoHS Status: Supplier Unconfirmed

If the sequential condition, performance measurement start/end, or point-to-point for the internal
trace is set, conditions of Event Condition to be used will be disabled. Such conditions must be
enabled from the popup menu by clicking the right mouse button on the [Event Condition] sheet.
Notes: 1. If the Event condition is set for the slot in the delayed branch instruction by the
2. Do not set the Event condition for the SLEEP instruction by the program counter (after
3. When the Event condition is set for the 32-bit instruction by the program counter, set
4. If the power-on reset and the Event condition are matched simultaneously, no condition
5. Do not set the Event condition for the DIVU or DIVS instruction by the program
program counter (after execution of the instruction), the condition is satisfied before
executing the instruction in the branch destination (when a break has been set, it occurs
before executing the instruction in the branch destination).
execution of the instruction).
that condition in the upper 16 bits of the instruction.
will be satisfied.
counter (after execution of the instruction).
Figure 3.1 [Source] Window at Execution Halt (Sequential Break)
Rev. 4.00 Feb. 18, 2009 Page 39 of 64
REJ10J1662-0400