8-1393792-8 TE Connectivity, 8-1393792-8 Datasheet - Page 78

• Manufacturer Part Number: 8-1393792-8
• Description: Electromechanical Relay DPDT 3A 12VDC 968Ohm Through Hole
• Manufacturer: TE Connectivity
• Type: Signal Relayr

Specifications of 8-1393792-8

• Contact Arrangement: DPDT
• Dc Coil Voltage: 12 V
• Coil Current: 12.4 mA
• Mounting: Through Hole

306
Dimensions are shown for
reference purposes only.
Features
• Low cost, small package dry reed relay.
• 1 Form A contact and 2 Form A arrangements.
Initial Insulation Resistance
Between Mutually Insulated Elements: 1,000M ohms min. @ 100VDCM.
Contact Data @ 20 C
Arrangements: 1 Form A (SPST-NO), 2 Form A (DPST-NO).
Material: Rh, Ru.
Max. Switching Rate: 300 ops./min. (no load).
Expected Mechanical Life: 100 million operations (no load).
Expected Electrical Life: 1,000,000 operations (rated load).
Minimum Load: 1mA @ 1VDC.
Initial Contact Resistance: 150 milliohms @ 100mA, 6VDC.
Initial Dielectric Strength
Between Open Contacts: 200VDC. (1 second).
Between Coil and Contacts: 3,000VDC. (1 second).
Surge Voltage Between Coil and Contacts: 3,000V (10 / 160 s).
Contact Ratings
Ratings:
100 A @ 5VDC, 100,000,000 operations.
1mA @ 5VDC, 50,000,000 operations.
5mA @ 5VDC, 50,000,000 operations.
5mA @ 12VDC, 50,000,000 operations.
10mA @ 12VDC, 50,000,000 operations.
100mA @ 12VDC, 10,000,000 operations.
100mA @ 24VDC, 7,000,000 operations.
200mA @ 24VDC, 7,000,000 operations.
400mA @ 24VDC, 5,000,000 operations.
Max. Switched Voltage: AC: 120V.
Max. Switched Current: 0.5A .
Max. Switched Power: 10VA, 10W.
30 ops./min. (rated load).
DC: 60V.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Catalog 1308242
Issued 3-03
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Mechanical Data
Termination: Printed circuit terminals.
Enclosure (94V-0 Flammability Ratings):
Weight: 0.16 oz (4.5g) approximately.
Coil Data
Voltage: 6 to 24VDC.
Nominal Power: 100 mW to 280mW.
Coil Temperature Rise: 30 C max., at rated coil voltage.
Max. Coil Power: 160% of nominal.
Duty Cycle: Continuous.
Coil Data @ 20 C
Operate Data
Must Operate Voltage: 70% of nominal voltage or less.
Must Release Voltage: 10% of nominal voltage or more.
Operate Time: 1.0 ms max.
Release Time: 0.5 ms max.
Environmental Data
Temperature Range:
Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude
Shock, Mechanical: 1,000m/s
Operating Humidity: 20 to 85% RH. (Non-condensing)
OMR
Dry Reed Relay
Telecommunications, Office Machines.
Rated Coil
Voltage
(VDC)
Operating: -30 C to +70 C
5/6
12
24
File No. E82292
9
OMR: Open, no cover.
OMR-C: Snap-on dust cover.
Operational: 100m/s
Specifications and availability
subject to change.
Operational: 10 to 55 Hz., 1.5mm double amplitude.
Nominal
series
Current
(mA)
24.0
11.4
11.5
12.9
(ohms)
Resistance
2
(10G approximately).
1,050
2,080
2
Coil
(100G approximately).
250
700
OMR
10%
Must Operate
Voltage
16.80
(VDC)
3.50
6.30
8.40
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Must Release
Voltage
(VDC)
0.50
0.90
1.20
2.40
OEG