1986164-2 TE Connectivity, 1986164-2 Datasheet - Page 28

• Manufacturer Part Number: 1986164-2
• Description: Solar Cable 1Conductors 10AWG 152.4m 5.33mm Tinned Copper Black 2600VDC/3000VAC Reel
• Manufacturer: TE Connectivity
• Type: Solar Cabler

Specifications of 1986164-2

• Number Of Conductors: 1
• Size: 10 AWG
• Conductor Material: Tinned Copper
• Reel Length (imperial): 500ft
• Reel Length (metric): 152.4m
• Conductor Size Awg: 10
• Conductor Area Csa: 5.26mm
• Jacket Color: Black
• External Diameter: 5.461mm
• Rohs Compliant: Yes
• Color, Jacket: Black
• Conductor Size: 10 AWG
• Insulation Material: Electron beam cross-linked Polyolefin
• Material, Conductor: Stranded tin-plated copper
• Standards: UL File E214122 and E314125, USE-2, RHH, RHW-2, XHH, XHHW-2 and Approved, VW-1 Flammability
• Temperature, Operating: –40°C to +120°C
• Voltage, Rating: 1800/2600 VAC/VDC
• Color: Black
• Max Conductor Temperature: 90° Wet or Dry
• Voltage Rating: 600 Volts (UL)
• Product Type: Cable
• Cable Type: RHH, RHW-2, XHHW and USE-2 Rated, UL 854 Approved
• Wire Size (mm² [awg]): 5.3² [10]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Quantity: 500 Ft. per Reel
• Lead Free Status / Rohs Status: RoHS Compliant part

26
IMPORTANT NOTE
te.com/solar
Catalog 3-1773458-6 | Issue Date 04/2011
Termination of the Cable
Wires and Crimping of
General Comments
of the Connectors
the Contacts
3.1 Handling
Dimensions are in inches and millimeters unless otherwise specified.
Values in brackets are standard equivalents. Dimensions are shown
for reference purposes only. Specifications subject to change.
SOLARLOK Connectivity Systems for PV Installers
Assembly and Installation Guidelines
SOLARLOK plug connectors
ATTENTION : This connector is to be used only to interconnect firmly fixed cables
DO NOT DISCONNECT UNDER LOAD : Current path should only be disconnected
using approved disconnect devices.
SOLARLOK component cable can be labeled with label PN : 1718077-1.
(DO NOT DISCONNECT UNDER LOAD)
PROTECT AGAINST SHOCK : Ensure that conductors and their associated
connectors are separated from opposite polarity components.
Mounting and installation must be done by qualified and trained staff considering
all applying safety regulations. Failure to follow all instructions in Application
Specification 114-18488 (available at www.tycoelectronics.com/documents), including
using only approved TE tooling (if applicable), can result in improper installation
and/or crimping which is dangerous and may cause or contribute to electrical fires.
Should be used only by individuals with proper training and experience.
Any kind of pollution (dust, oil, humidity, etc.) during the assembly process or to the unmated
connector can degrade contact and connector performance. This applies in particular to the
seals and the crimping of the contacts. A clean assembly environment is essential.
•
•
•
•
When assembling the connectors, the following sequence must be followed:
1 : Stripping the wire to 9 +/- 1mm without damaging the strands
(please refer to application specification #114-74013)
SOLARLOK connectors use different crimp contacts for various wire gauges.
Possible wire gauges are 2.5 mm
The tools to be used are selected based upon the wire gauge.
For the application specification, please refer to specification #114-18488.
2
, 4.0 mm
USA: 1-800-522-6752
Canada: [phone]
Mexico: [phone]
2
, and 6.0 mm
Latin/S. America: [phone]
Germany: [phone]
UK: [phone]
2
, AWG 14, AWG 12 and AWG 10.
France: [phone]
Netherlands: [phone]
China: [phone]
Fig.1