583204-2 TE Connectivity, 583204-2 Datasheet - Page 4

• Manufacturer Part Number: 583204-2
• Description: Conn Contact F 1 POS Crimp ST Cable Mount Strip on Reel
• Manufacturer: TE Connectivity
• Type: Contactr

Specifications of 583204-2

• Number Of Contacts: 1
• Contact Plating: Gold Over Nickel
• Mounting: Cable Mount
• Termination Method: Crimp
• Rohs Compliant: YES
• Product Type: Contact
• Wire Insulation Diameter (mm [in]): 1.27 – 1.63 [0.050 – 0.064]
• Termination Method To Wire/cable: Crimp
• Contact Retention In Housing: Crimp Snap-In
• Solder Tail Contact Plating: Gold Flash
• Wire Range (mm [awg]): 0.12-0.40² [26-22]
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Phosphor Bronze
• Underplate Material: Nickel
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Contact Packaging Method: Strip Form

Catalog 1773096
Revised 2-10
www.tycoelectronics.com
All ELCON drawer series connectors can be fix-mounted or float-mounted using the designated shoulder screws to allow
improved gatherability for blind-mating of the connector. Panel cut out dimensions are shown on the customer drawing
specific to your ELCON drawer connector.
Panel Float Mounting
When float-mounting to a panel or chassis, use the stainless steel shoulder screws specified in the layout sheet or
customer drawing specific to your ELCON drawer connector. Shown in the sketch below is an example of how the
Top Drawer connector is float-mounted to a panel.
Panel Fix Mounting
As a rule of thumb, ELCON drawer connectors can be fix-mounted to a panel, in two ways: (1) by attaching a screw
through the top and bottom mounting flange of the housing; or (2) by attaching a screw into a threaded guide pin (for
those connectors that have one). An example of each case is shown in the sketches below.
Screw Through Mounting Flange of Housing
Fix to the panel by attaching a commercially available
screw and a washer through the top and bottom mounting
flange of the housing.
available screw
Commercially
and washer
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Power Connectors & Interconnection Systems
ELCON Drawer Connector Mounting
Note: All part numbers are RoHS compliant.
#10-32 UNF 2A Thread
M5 x 0.8 Metric Thread
M4 x 0.7 Metric Thread
Panel (Ref)
#8-32 UNF 2A Thread
#6-32 UNF 2A Thread
Screw Description
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
available screw
Commercially
and washer
Float-Mount of Top Drawer (Example)
Part Number
Screw Into Thread of Guide Pin (When Applicable)
You can optionally fix-mount housings that have a guide
pin by attaching a commercially available screw and
washer into the thread on the back of the guide pin, as
shown in the figures below.
1650399-1
1650401-1
1650402-1
1650106-1
1650589-1
Mounting
Flange
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Internally threaded
(6-32) guide pin
Top and Double Drawer, Dual and QuadPower,
In-Line QuadPower, W5 Drawer
Shoulder
All Other Drawers
Screw
M3 x 0.5 screw
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Used On
#6-32 or
Guide Pin
[6.35]
.25
Guide pin
65