CSPEMI608G ON Semiconductor, CSPEMI608G Datasheet - Page 9

• Manufacturer Part Number: CSPEMI608G
• Description: EMI/RFI Suppressors & Ferrites EMI/RFI Filter with ESD Protection
• Manufacturer: ON Semiconductor

Specifications of CSPEMI608G

• Product: EMI Filters
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Application Information
Refer to Application Note AP-217, "The Chip Scale
Package", for a detailed description of Chip Scale
Packages offered by California Micro Devices.
© 2008 California Micro Devices Corp. All rights reserved.
PARAMETER
Pad Size on PCB
Pad Shape
Pad Definition
Solder Mask Opening
Solder Stencil Thickness
Solder Stencil Aperture Opening (laser cut, 5% tapered walls)
Solder Flux Ratio
Solder Paste Type
Pad Protective Finish
Tolerance — Edge To Corner Ball
Solder Ball Side Coplanarity
Maximum Dwell Time Above Liquidous
Maximum Soldering Temperature for Eutectic Devices using Eutectic Solder Paste
Maximum Soldering Temperature for Lead-free Devices using Lead-free Solder Paste
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
Figure 11. Eutectic (SnPb) Solder
Ball Reflow Profile
Figure 10. Recommended Non-Solder Mask Defined Pad Illustration
PRINTED CIRCUIT BOARD RECOMMENDATIONS
Non-Solder Mask Defined Pad
Solder Stencil Opening
Solder Mask Opening
0.275mm DIA.
0.330mm DIA.
0.325mm DIA.
Issue B – 04/30/08
Tel: [phone]
250
200
150
100
50
Figure 12. Lead-free (SnAgCu) Solder
0
Fax: [phone]
1:00.0
Ball Reflow Profile
Non-Solder Mask defined pads
Time (minutes)
2:00.0
OSP (Entek Cu Plus 106A)
CSPEMI606/608
0.125mm - 0.150mm
0.325mm Round
0.330mm Round
50/50 by volume
60 seconds
0.275mm
No Clean
3:00.0
VALUE
+50μm
+20μm
Round
240°C
260°C
www.cmd.com
4:00.0
9