HEDS-6540#J11 Avago Technologies US Inc., HEDS-6540#J11 Datasheet - Page 11

• Manufacturer Part Number: HEDS-6540#J11
• Description: Encoders Optical Encoders 24CPR 4mm
• Manufacturer: Avago Technologies US Inc.
• Type: Optical Encoderr

Specifications of HEDS-6540#J11

• Number Of Channels: 3
• Supply Voltage: 5 V
• Operating Temperature Range: - 40 C to + 100 C
• Product: Optical
• Size / Dimension: 56 mm
• Pulses Per Revolution: 1024 CPR
• Detents: No
• Motion: Rotary
• Mounting Style: Screw
• Index Output: Indexed
• Encoder Signal: Digital
• Built In Switch: No
• Shaft Style: Round
• Shaft Diameter (mm): 4mm
• Operating Temperature Min Deg. C: -40C
• Operating Temperature Max Deg. C: 100C
• Terminal Type: Cable
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

11
3
4
ALIGN ENCODER MODULE AND CODEWHEEL AS SHOWN.
BE CAREFUL NOT TO DAMAGE THE ENCODER INTERNAL COMPONENTS
WITH THE CODEWHEEL.
BRING THE ENCODER MODULE AND CODEWHEEL DOWN SUCH THAT
THE ENCODER MODULE LOCATING HOLES (ON ITS UNDERSIDE)
MATE WITH THE BASEPLATE ROUND PINS. THE BASEPLATE SQUARE
PINS SHOULD SEAT INTO THE ENCODER MODULE MOUNTING
THRU HOLES.
CONCURRENTLY, BRING THE CODEWHEEL DOWN ONTO THE
MATING SHAFT.
CHOOSE CENTERING CYLINDER OR UNDERSIDE LOCATING PINS.
CENTERING CYLINDER: LOCATE ENCODER BASEPLATE WITH
CENTERING CYLINDER. WHEN IN PLACE, TIGHTEN MOUNTING SCREWS.
LOCATING PINS: WITH LOCATING PINS PROPERLY SEATED IN
CORRESPONDING RECEIVING HOLES IN ENCODER BASEPLATE,
TIGHTEN MOUNTING SCREWS.
LOCATE ENCODER MODULE AND CODEWHEEL
LOCATE ENCODER BASEPLATE
HEDL-65XX fig 14
HEDL-65XX fig 13