W2E142-BB05-01 EBM-Papst Industries Inc, W2E142-BB05-01 Datasheet - Page 2

• Manufacturer Part Number: W2E142-BB05-01
• Description: FAN EXH 172 X 150 X 38MM 115VAC
• Manufacturer: EBM-Papst Industries Inc
• Series: W2E142r
• Type: Roundr

Specifications of W2E142-BB05-01

• Current Type: AC
• Supply Voltage: 115 V
• Bearing Type: Ball
• Fan Type: Tubeaxial
• Size / Dimension: Rectangular/Rounded- 172mm L x 150mm H x 38mm W
• Voltage Rating: 115VAC
• Power (watts): 28W
• Rpm: 3350 RPM
• Noise: 57 dB(A)
• Air Flow: 230.0 CFM (6.51m³/min)
• Termination: 2 Terminals
• Weight: 1.8 lbs (816.47g)
• Termination Style: 57 dB(A)
• Speed: 3300 RPM
• Frame Dimensions (mm): 150 mm x 38 mm
• Housing Material: Aluminum Die-Cast
• Power Rating: 24 W
• External Height: 150mm
• External Width: 172mm
• External Depth: 38mm
• External Diameter: 152.5mm
• Flow Rate: 230CFM
• Noise Rating: 57dBA
• Brand/series: W2E142
• Dimensions: 5.91 x 6.77 x 1.5 "
• Direction: Exhaust over Struts
• Noise Level: 57 dBA
• Power, Rating: 24 W
• Size: 5.91 x 6.77 x 1.5 (150 x 172 x 38) In. (mm)
• Temperature, Operating, Maximum: +70 °C
• Voltage, Rating: 115 VAC
• Diameter: 152.5mm
• Flow Rate - Imperial: 230CFM
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Static Pressure: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 381-1063; W2E142BB0501

1.5 Safety and protective functions
1.6 Mechanical movement
1.7 Emission
Item no.: 10948-5-9970 · Revision status: KM70969 · Print-out on 02/12/2010 · Created by A. Kehm (VM---) · Page 2 of 9
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone: [phone] · Fax: [phone] · [e-mail] · www.ebmpapst.com
W2E142-BB05-01
CAUTION
The motor restarts automatically when operating voltage
is applied, e.g. after a power failure.
Danger of injury
DANGER
Missing safety device and non-functioning safety device
If there is no safety device, you could be seriously injured, for
example by reaching into the running device with your hands.
DANGER
Rotating device
Body parts coming into contact with the rotor and impeller can
be injured.
WARNING
Rotating device
Long hair, loose items of clothing and jewellery could become
entangled and pulled into the device. You could be injured.
WARNING
Flying parts
If safety devices are missing, this may cause fan blades to be
ejected at high speeds, causing bodily harm.
WARNING
Depending on the installation and operating conditions,
a sound pressure level greater than 70 dB(A) may arise.
Danger of noise-induced hearing loss
Keep out of the danger zone of the device.
When working on the device, switch off the mains
supply voltage and secure the latter from being switched on
again.
Wait until the device stops.
Operate the device only with a fixed and isolating safety
protection and a fixed guard grille. The guard must withstand
the kinetic energy of a fan blade detaching at maximum
speed.
The device is a built-in component. You, the owner/
operator, are responsible for providing adequate protection for
the device.
Instantly stop the device once you detect a missing or
ineffective protective feature.
Secure the device against accidental contact.
Before working on the system/machine, wait until all
parts have come to a standstill.
Do not wear any loose clothing or jewellery while working
on rotating parts.
Protect long hair by wearing a cap.
Take appropriate safety measures. The safety devices must
prevent contact with rotating and electrically live parts.
Take appropriate technical safety measures.
Protect operating personnel with appropriate safety
equipment, e.g. hearing protection.
Also observe the requirements of local agencies.
Operating instructions
1.8 Hot surface
1.9 Transport
1.10 Storage
Store the device in a dry and weatherproof manner in the original
packing in a clean environment.
Protect the device from environmental impacts and dirt until the final
installation.
We recommend storing the device for a maximum up to one year to
guarantee proper operation and longest possible service life.
Even devices explicitly suited for outdoor use are to be stored as
described prior to being commissioned. Maintain the storage
temperature, see
chapter 3.5 Transport and storage conditions.
1.11 Disposal
When disposing of the device, please comply with all relevant
requirements and regulations applicable in your country.
CAUTION
High temperature at the motor housing
Danger of burn injuries
NOTE
Transport of device
Ensure that sufficient protection against accidental contact is
provided.
Transport the device in its original packaging only.
Secure the device so that it does not slip, e.g. by using a
clamping strap.