PIC16F616-H/ML Microchip Technology, PIC16F616-H/ML Datasheet - Page 70

• Manufacturer Part Number: PIC16F616-H/ML
• Description: 1.75KB Flash, 64B RAM, 6 I/O, 8MHz Internal Oscillator 16 QFN 4x4mm TUBE
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F616-H/ML

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 11
• Program Memory Size: 3.5KB (2K x 14)
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 150°C
• Package / Case: 16-QFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC16F610/616/16HV610/616
8.11
The comparator voltage reference module provides an
internally
comparators. The following features are available:
• Independent from Comparator operation
• Two 16-level voltage ranges
• Output clamped to V
• Ratiometric with V
• Fixed Reference (0.6V)
The VRCON register (Register 8-6) controls the
voltage reference module shown in Figure 8-9.
8.11.1
The comparator voltage reference is independent of
the comparator configuration. Setting the FVREN bit of
the VRCON register will enable the voltage reference.
8.11.2
The
voltage levels in each range. Range selection is
controlled by the VRR bit of the VRCON register. The
16 levels are set with the VR<3:0> bits of the VRCON
register.
The CV
following equations:
EQUATION 8-1:
The full range of V
the construction of the module. See Figure 8-9.
DS41288F-page 70
V
V
CV
RR
RR
REF
=
=
Comparator Voltage Reference
REF
CV
CV
0 (high range):
1 (low range):
generated
INDEPENDENT OPERATION
OUTPUT VOLTAGE SELECTION
voltage reference has 2 ranges with 16
REF
REF
output voltage is determined by the
=
=
SS
DD
(VR<3:0>/24)
(V
to V
CV
SS
DD
voltage
DD
/4) +
REF
cannot be realized due to
OUTPUT VOLTAGE
(VR<3:0> V
reference
×
V
DD
×
DD
for
/32)
the
8.11.3
The fixed voltage reference output voltage can be set
to Vss with no power consumption by clearing the
FVREN bit of the VRCON register (FVREN = 0). This
allows the comparator to detect a zero-crossing while
not consuming additional module current.
8.11.4
The comparator voltage reference is V
therefore, the CV
V
Voltage Reference can be found in Section 15.0
“Electrical Specifications”.
DD
. The tested absolute accuracy of the Comparator
OUTPUT CLAMPED TO V
OUTPUT RATIOMETRIC TO VDD
REF
output changes with fluctuations in
© 2009 Microchip Technology Inc.
DD
SS
derived and