PIC16F723-E/MV Microchip Technology, PIC16F723-E/MV Datasheet - Page 81

• Manufacturer Part Number: PIC16F723-E/MV
• Description: 7 KB Flash, 1.8V-5.5V, 16 MHz Int. Osc. 28 UQFN 4x4x0.5mm TUBE
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F723-E/MV

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Size: 7KB (4K x 14)
• Program Memory Type: FLASH
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 11x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 28-UFQFN Exposed Pad
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

REGISTER 6-13:
REGISTER 6-14:
© 2009 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-0
Note 1:
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-0
Note 1:
TRISD7
ANSD7
R/W-1
R/W-1
2:
TRISD is not implemented on PIC16F722/723/726/PIC16LF722/723/726 devices, read as ‘0’.
When setting a pin to an analog input, the corresponding TRIS bit must be set to Input mode in order to
allow external control of the voltage on the pin.
ANSELD register is not implemented on the PIC16F722/723/726/PIC16LF722/723/726. Read as ‘0’.
ANSD<7:0>: Analog Select between Analog or Digital Function on Pins RD<7:0>, respectively
0 = Digital I/O. Pin is assigned to port or Digital special function.
1 = Analog input. Pin is assigned as analog input
TRISD<7:0>: PORTD Tri-State Control bits
1 = PORTD pin configured as an input (tri-stated)
0 = PORTD pin configured as an output
ANSD6
TRISD6
R/W-1
R/W-1
TRISD: PORTD TRI-STATE REGISTER
ANSELD: PORTD ANALOG SELECT REGISTER
W = Writable bit
‘1’ = Bit is set
W = Writable bit
‘1’ = Bit is set
ANSD5
TRISD5
R/W-1
R/W-1
TRISD4
ANSD4
R/W-1
R/W-1
PIC16F72X/PIC16LF72X
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
TRISD3
ANSD3
R/W-1
R/W-1
(1)
(1)
. Digital Input buffer disabled.
TRISD2
ANSD2
R/W-1
R/W-1
(2)
x = Bit is unknown
x = Bit is unknown
TRISD1
ANSD1
R/W-1
R/W-1
DS41341E-page 81
TRISD0
ANSD0
R/W-1
R/W-1
bit 0
bit 0