PIC24FJ32GA104-I/PT Microchip Technology, PIC24FJ32GA104-I/PT Datasheet - Page 39

• Manufacturer Part Number: PIC24FJ32GA104-I/PT
• Description: 16-bit, 16 MIPS, 32KB Flash, 8KB RAM, Nanowatt XLP 44 TQFP 10x10x1mm TRAY
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24FJ32GA104-I/PT

• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 35
• Program Memory Size: 32KB (11K x 24)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARD
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5.2.12
The QVER command queries the version of the
programming executive software stored in test
memory. The “version.revision” information is returned
in the response’s QE_Code using a single byte with the
following format: main version in upper nibble and
revision in the lower nibble (i.e., 23h means version 2.3
of programming executive software).
Expected Response (2 words):
5.3
The programming executive sends a response to the
programmer for each command that it receives. The
response indicates if the command was processed
correctly. It includes any required response data or
error data.
The programming executive response set is shown in
Table 5-2. This table contains the opcode, mnemonic
and description for each response. The response format
is described in Section 5.3.1 “Response Format”.
TABLE 5-2:
© 2009 Microchip Technology Inc.
15
Opcode
Length
1h
2h
3h
Opcode
Opcode
1BMNh (where “MN” stands for version M.N)
0002h
Field
Programming Executive
Responses
12 11
QVER COMMAND
PASS
FAIL
NACK
Mnemonic
Bh
1h
PROGRAMMING EXECUTIVE
RESPONSE OP CODES
Command successfully
processed
Command unsuccessfully
processed
Command not known
Description
Length
Description
0
5.3.1
All programming executive responses have a general
format consisting of a two-word header and any
required data for the command.
5.3.1.1
The opcode is a 4-bit field in the first word of the
response. The opcode indicates how the command
was processed (see Table 5-2). If the command was
processed successfully, the response opcode is PASS.
If there was an error in processing the command, the
response opcode is FAIL and the QE_Code indicates
the reason for the failure. If the command sent to
the programming executive is not identified, the
programming executive returns a NACK response.
5.3.1.2
The Last_Cmd is a 4-bit field in the first word of
the response and indicates the command that the
programming executive processed. Since the program-
ming executive can only process one command at a
time, this field is technically not required. However, it
can be used to verify that the programming executive
correctly received the command that the programmer
transmitted.
Opcode
Last_Cmd
QE_Code
Length
D_1
D_N
15
PIC24FJ64GA1/GB0
Opcode
Field
RESPONSE FORMAT
12 11
Opcode Field
Last_Cmd Field
Response opcode
Programmer command that
generated the response
Response length in 16-bit words
(includes 2 header words)
First 16-bit data word (if applicable)
Last 16-bit data word (if applicable)
Query code or error code.
Last_Cmd
D_N (if applicable)
D_1 (if applicable)
Length
...
8 7
Description
QE_Code
DS39934B-page 39
0