STM3220G-EVAL STMicroelectronics, STM3220G-EVAL Datasheet - Page 18

• Manufacturer Part Number: STM3220G-EVAL
• Description: 16/32-BITS MICROS
• Manufacturer: STMicroelectronics
• Series: STM32r
• Type: MCUr

Specifications of STM3220G-EVAL

• Contents: Board
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: STM32 F2 Series

Hardware layout and configuration
2.18
Note:
18/66
1
2
Camera module
A camera module is connected to DCMI bus of STM32F207IGH6 and shares the same I/Os
with the motor control connector. SB16 must be kept open for camera module application.
There are two possible modules and omnivision cameras populated on the CN15 connector
of the board:
Table 13.
When the camera demo loaded in Flash is executed, some green pixels may appear in high
contrast zones, depending on the image captured.
The camera is not firmly restricted on its connector (CN15). It is possible that during
shipment the camera could be unplugged. In such case you need to plug it into the right
position as shown on the picture below (pin 1 dot on top left corner of the socket).
It is not recommended to remove it in order to avoid false contact later.
1.3 Megapixel: Module CN01302H1045-C: Camera OV9655
2 Megapixel: Module CN020VAH2554-C: Camera OV2640
Jumper
SB16
JP26
Camera module related jumpers
To set power down mode for the camera module, JP26 is fitted.
Default setting: Not Fitted
Description of SB16 is in
Doc ID 018499 Rev 3
Section 2.9: Motor
Description
control.
UM1057