SX8644I05AWLTRT Semtech, SX8644I05AWLTRT Datasheet - Page 24

no-image

SX8644I05AWLTRT

Manufacturer Part Number
SX8644I05AWLTRT
Description
12-ch Capacitive Touch Solution (Button & Slider)
Manufacturer
Semtech
Datasheets

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
SX8644I05AWLTRT
Manufacturer:
SEMTECHCORPORATION
Quantity:
20 000
Company:
Part Number:
SX8644I05AWLTRT
Quantity:
1 945
ADVANCED COMMUNICATIONS & SENSING
3.15 Interrupt
3.15.1 Power up
During power up the INTB is kept low. Once the power up sequence is terminated the INTB is released
autonomously. The SX8644 is then ready for operation.
During the power on period the SX8644 stabilizes the internal regulators, RC clocks and the firmware initializes all
registers.
During the power up the SX8644 is not accessible and I2C communications are forbidden.
As soon as the INTB rises the SX8644 will be ready for I2C communication.
3.15.2 Assertion
INTB is updated in Active or Doze mode once every scan period.
The INTB will be asserted: at the following events:
3.15.3 Clearing
INTB is updated in Active or Doze mode once every scan period.
The clearing of the INTB is done as soon as the host performs a read to the IrqSrc I2C register or reset is
completed
Revision 7_3, January 10
• if a Button event occurred (touch or release if enabled). I2C registers CapStatMsb and CapStatLsb show the
• if a Slider event occurred (touch, release, move high, move low or position change). I2C registers
• if a GPI edge occurred (rising or falling if enabled). I2C register GpiStat shows the detailed status of the GPI
• when actually entering Active or Doze mode either through automatic wakeup or via host request (may be
• once compensation procedure is completed either through automatic trigger or via host request (may be
• once SPM write is effective (may be delayed by 1 scan period),
• once NVM burn procedure is completed (may be delayed by 1 scan period),
• during reset (power up, hardware RESETB, software reset).
detailed status of the Buttons,
CapStatMsb, SldPosMsb and SldPosLsb show the detailed status of the Slider,
pins,
delayed by 1 scan period). I2C register CompOpmode shows the current operation mode,
delayed by 1 scan period),
Figure 24
Touch Controller (12 sensors) with Enhanced LED Drivers
© 2009 Semtech Corp.
Power Up vs. INTB
24
Ultra Low Power, Capacitive Button and Slider
DATASHEET
www.semtech.com
SX8644

Related parts for SX8644I05AWLTRT