USB-5PSMBUS-CABLEZ Analog Devices Inc, USB-5PSMBUS-CABLEZ Datasheet - Page 4

• Manufacturer Part Number: USB-5PSMBUS-CABLEZ
• Description: 5-pin 1USB SMBUS CABLE(ROHS)
• Manufacturer: Analog Devices Inc

Specifications of USB-5PSMBUS-CABLEZ

• Accessory Type: SMBus Cable
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: ARM7TDMI™
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

EVAL-ADM1175/ADM1176/ADM1177/ADM1178
Switch
S6
S7
VR1
JUMPER FUNCTIONS
Table 2.
Jumper
LK1
LK2
LK3
LK4
LK5
J1
J2
LED FUNCTIONS
Table 3.
LED
D1
D3
D4
CONFIGURATION LINK FUNCTIONS
To configure an evaluation board to a specific device, ensure that the links in Table 4 are inserted.
Table 4.
Link
SL1
SL2
SL3
SL4
SL5
SL6
Description
Applies only to the ADM1175 device. Controls the CONV pin, when depressed the CONV pin is high. For Switch S6 to
control the CONV pin, the jumper in Link 3 should be in Position B (separate from S7).
Switches the ON pin logically high or low.
ADM1175-1/ADM1176-1/ADM1177-1/ADM1178-1 or ADM1175-2/ADM1176-2/ADM1177-2/ADM1178-2: switch to
3.3 V to enable the device.
ADM1175-3/ADM1175-4: switch to ground to enable the device.
VR1 adjusts a variable load, turning the switch clockwise reduces the load resistance and hence increases the load
current to a maximum of 550 mA.
Description
When inserted, the gate of the FET is connected to the GATE pin.
Applies only to ADM1178.
In Position A, LK2 connects the ALERTB pin to the I
In Position B, LK2 connects the ALERTB pin to LED (D4).
Applies only to ADM1175.
In Position A, LK3 connects the CONV pin to the I
In Position B, LK3 connects the CONV pin to Switch S6.
ADM1175: Connects the CONV pin to LK3.
ADM1176: Connects the A1 pin to S4.
ADM1177: Connects the SS pin to S4.
ADM1178: Connects the GATE pin to the gate node of the hot swap FET.
Connects A0 Address Switch S3 to Pin ADR/A0 when inserted.
In Position B, V
In Position A, V
In Position B, V
Name
Input
Output
Alert
In Position A, development Area A (V
Description
Configuration link applies to the ADM1175, ADM1176, and ADM1177.
Configuration link applies to the ADM1178.
Configuration link applies to the ADM1178.
Configuration link applies to the ADM1175.
Configuration link applies to the ADM1176.
Configuration link applies to the ADM1177.
IN
SOURCE
SOURCE
is connected to V
Description
Indicates supply voltage is present.
Indicates that the FET is on and output voltage is present.
Indicates an overcurrent alert (ADM1178 only).
of FET Q1 is connected to programmable load circuit.
of FET Q1 is connected to Development Area C (V
DRAIN
DRAIN
of FET Q1.
) is connected to the SENSE pin of the devices.
Rev. 0 | Page 4 of 20
2
C CONV line.
2
C ALERTB line.
SOURCE
).
Default
Depressed
High
N/A
Default
Inserted
A
A
Inserted
Inserted
B
B