SLCF1GM2PUI STEC, SLCF1GM2PUI Datasheet - Page 45
![no-image](/images/no-image-200.jpg)
SLCF1GM2PUI
Manufacturer Part Number
SLCF1GM2PUI
Description
Manufacturer
STEC
Type
CompactFlashr
Datasheet
1.SLCF1GM2PUI.pdf
(56 pages)
Specifications of SLCF1GM2PUI
Density
1GByte
Operating Supply Voltage (typ)
3.3/5V
Operating Temperature (min)
-40C
Operating Temperature (max)
85C
Package Type
Not Required
Pin Count
50
Operating Temperature Classification
Industrial
Operating Supply Voltage (min)
2.97/4.5V
Operating Supply Voltage (max)
3.63/5.5V
Programmable
Yes
Lead Free Status / RoHS Status
Compliant
SLCFxxx(G)M2PU(I)
Datasheet
6.0 Registers
This chapter lists the registers of the CF Card. Refer to CompactFlash standards for further details.
6.1
In PC Card Mode, four configuration registers, as listed in Table 27, are used.
Note: In True IDE Mode, these registers cannot be used.
Configuration Option Register
Configuration and Status Register
Pin Replacement Register
Socket and Copy Register.
Configuration Registers
Configuration Register
Table 27: Configuration Registers
61000-05610-108, April 2009
This register is used to configure and observe the status of the CF
Card, and to issue soft resets to it. Also, the Index bits of this register
are used to select the PC Card mapping mode that the CF Card uses:
1) PC Card Memory, 2) PC Card Contiguous I/O, 3).PC Card Primary
I/O, and 4) PC Card Secondary I/O
This register is used for observing the CF Card state.
This register is used for providing the signal state of -IREQ when the
CF Card is configured in the PC Card I/O Mode.
This read/write register is used to identify the CF Card from other
devices. This register should be set by the host before this
Configuration Option register is set.
Description
CompactFlash Card
45