Z6S248C STEC, Z6S248C Datasheet - Page 32

• Manufacturer Part Number: Z6S248C
• Manufacturer: STEC
• Type: Solid State Driver

Specifications of Z6S248C

• Density: 48GByte
• Operating Supply Voltage (typ): 5V
• Operating Temperature (min): 0C
• Operating Temperature (max): 70C
• Package Type: Not Required
• Mounting: Screw
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (min): 4.75V
• Operating Supply Voltage (max): 5.25V
• Lead Free Status / RoHS Status: Compliant

14
Drive Power-On Ready Time
The power-on ready time for the SSD is less than 2.5 seconds. Power-on ready time is measured
from the time the drive is powered on to the time the drive is ready to accept the first command from
the host.
Power Saving Commands
Zeus SSDs support the following Power Savings commands and respond with the appropriate status:
The drives comply with all specifications that define the behavior of storage devices as it relates to
power management and advanced power management (APM).
When the SSDs receive a power management command, all data in the write cache buffer is written
to the media before drive ready is asserted.
Power Mode at Power On
The Zeus SSDs comply with the latest ATA Power Management Specification. During the Power On
Reset sequence, the drive functions properly and responds as appropriate. In addition, if a SRST
(ATA Interface Reset) occurs during this sequence, the drives still respond normally. The drives goes
into IDLE or STANDBY mode, depending on the setting by the host, after power on or hard reset.
Grounding
Signal and chassis grounds are not connected together in the drive. To ensure minimal EM
emissions, the user should provide maximum surface contact area when connecting the drive to the
chassis ground.
Hardware Purge
A voltage can be applied to Pin 13 to invoke a hardware purge. The user can employ a software utility
to preset whether BasicPurge™, RapidPurge™, MilPurge™, or Intelligent Destructive Purge™ is
used when a voltage is applied to Pin 13. See
•
•
•
•
•
Check Power Mode
Idle
Standby
Standby Immediate
Sleep
Power Segment Pinout
Zeus 2.5-Inch Serial ATA Solid State Drive
Specification.