SLCF2GBJI STEC, SLCF2GBJI Datasheet - Page 30
![no-image](/images/no-image-200.jpg)
SLCF2GBJI
Manufacturer Part Number
SLCF2GBJI
Description
Manufacturer
STEC
Type
CompactFlashr
Datasheet
1.SLCF2GBJI.pdf
(47 pages)
Specifications of SLCF2GBJI
Density
2GByte
Operating Supply Voltage (typ)
3.3/5V
Operating Temperature (min)
-40C
Operating Temperature (max)
85C
Package Type
Not Required
Mounting
Socket
Pin Count
50
Operating Temperature Classification
Industrial
Operating Supply Voltage (min)
3.18/4.75V
Operating Supply Voltage (max)
3.465/5.25V
Programmable
Yes
Lead Free Status / RoHS Status
Not Compliant
SLCFxxxJ(T2)(I)
Configuration and Status Register
(Address 202h)
This register is used for observing the card state.
Initial Value: 00h
Name
CHGED (CARD->)
SIGCHG (HOST->)
IOIS8 (HOST->)
PWD (HOST->)
INTR (CARD->)
CHGED
bit7
SIGCHG
bit6
R/W
R/W
R/W
R/W
R
R
Function
This bit indicates that CRDY/-BSY bit on Pin Replacement register is set to “1”. When the
This bit is set or reset by the host for enabling and disabling the status change signal (-STSCHG
The host sets this field to “1” when it can provide I/O cycles only with an 8 bit data bus (D7 to
When this bit is set to “1”, the card enters sleep state (power down mode). When this bit is reset
This bit indicates the internal state of the interrupt request. The bit is available whether the
IOIS8
CHGED bit is set to “1”, the -STSCHG pin is held low if the SIGCHG bit is also set to “1”
and the card configured for the I/O interface.
pin). When the card is configured to I/O card interface and this bit is set to “1”, -STSCHG pin
is controlled by CHGED bit. If this bit is set to “0”, -STSCHG pin is kept high when the card is
configured for I/O.
D0).
to “0”, the card transfers to idle state (active mode).
I/O card interface has been configured or not. This signal remains true until the condition
which caused the interrupt request has been serviced. If interrupts are disabled by the -IEN
bit in the Device Control Register, this bit is a zero.
bit5
bit4
0
bit3
0
Document Part Number 61000-02805-111 March 2005
PWD
bit2
INTR
bit1
COMPACTFLASH
bit0
0
Page 30