SLFLD25-6GBJ STEC, SLFLD25-6GBJ Datasheet - Page 20

• Manufacturer Part Number: SLFLD25-6GBJ
• Manufacturer: STEC
• Type: Flash Driver

Specifications of SLFLD25-6GBJ

• Density: 6GByte
• Operating Supply Voltage (typ): 5V
• Operating Temperature (min): 0C
• Operating Temperature (max): 70C
• Package Type: Not Required
• Mounting: Screw
• Pin Count: 44
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (min): 4.75V
• Operating Supply Voltage (max): 5.25V
• Programmable: Yes
• Lead Free Status / RoHS Status: Not Compliant

SLFLD25-xxxJ(I)
Write Sector(s)
(code: 30h or 31h)
This command writes from 1 to 256 sectors as specified in the
Sector Count register. A sector count of zero requests 256
sectors. The transfer begins at the sector specified in the
Sector Number register.
Write Sector(s) without Erase
(code: 38h)
This command is similar to the Write Sector(s) command
with the exception that an implied erase before the write
operation is not performed. Note that before using this
command, it is required to erase the repective sectors using
the Erase Sectors command.
Document Part Number 61000-02817-109 March 2005
Write Verify
(code: 3Ch)
This command is similar to the Write Sector(s) command
except each sector is verified immediately after being written.
IDE FLASH DRIVE
Page 20