GP2A230LRS0F Sharp Electronics, GP2A230LRS0F Datasheet - Page 8

• Manufacturer Part Number: GP2A230LRS0F
• Manufacturer: Sharp Electronics
• Type: Reflectiver

Specifications of GP2A230LRS0F

• Number Of Elements: 1
• Pin Count: 3
• Operating Temp Range: -10C to 70C
• Operating Temperature Classification: Commercial
• Lead Free Status / RoHS Status: Compliant

■ Design Considerations
● Design guide
● Recommended Installation Hole drawing
Normal type (Thickness of plate : 1mm)
GP2A231LRSAF
1) This product operates the light emitter by pulse drive. Please supply the stable supply voltage in order to
2) Prevention of detection error
3) Plugging in/out
This product is not designed against irradiation and incorporates non-coherent IRED.
1) We recommend to fi x the product at punching side on the fi xing plate (metal plate).
2) Please decide the fi nal dimensions at your side after confi rmation by the actual applications, Because
3) Tolerance shall be ±0.1mm
mounting effi ciency and mounted stabilization are dependent on mounting hole corner curve and punched
state.
Please use this device after connecting a capacitor between V
Please be careful that you need to keep the direct inverter light away from the photo detecting surface
since the device will not operate correctly in such case.
In addition, we recommend to make sure the operation test in the actual application.
The connector should be plugged in/out at normal temperature.
prevent error operation by pulse current.
8-R0.1
7.5
1
8
GP2A231LRSAF/GP2A230LRS0F/GP2A230LRSAF
GP2A230LRSAF
8-R0.1
O
7.5
and GND for prevention of line noise.
1
Sheet No.: D3-A05201EN