IPPOSPHYL2 Altera, IPPOSPHYL2 Datasheet - Page 25

• Manufacturer Part Number: IPPOSPHYL2
• Manufacturer: Altera

Specifications of IPPOSPHYL2

• Lead Free Status / RoHS Status: Not Compliant

Chapter 2: Getting Started
Simulate the Design
IP Functional Simulation Model
© November 2009 Altera Corporation
f
1
This section tells you how to use the demonstration testbench with the ModelSim
simulator or with other simulators using NativeLink.
For more information on NativeLink, refer to the
Simulation Tools
Testbench with the ModelSim Simulator
To use an example testbench with IP functional simulation models in the ModelSim
simulator, follow these steps:
The testbench includes pregenerated Verilog HDL IP functional simulation models.
1. Start the ModelSim simulator.
2. Change the directory to the sim_lib\modelsim directory.
3. For VHDL type the following command:
Testbench with NativeLink
You can run receive and transmit tests with third-party IP functional simulators using
NativeLink, for VHDL or Verilog HDL. The following procedure describes a receive
test for the Verilog HDL model.
To use the testbench with NativeLink, follow these steps:
1. Using the New Project Wizard in the Quartus II software, create a new project in
2. Add the POS-PHY level 2 and 3 library:
do compile_pl3_link_source_fixed_example_vlog_ipfs.tclr
or for Verilog HDL type the following command:
do compile_pl3_link_source_fixed_example_vhdl_ipfs.tclr
1
the \posphy_l2_l3\sim_lib\testbench\verilog directory with the project name
and top-level entity name of auk_pac_mrx_pl3_link.
1
1
a. On the Assignments menu click Settings.
b. Under Category click Libraries
c. In Project library name click ...
d. Browse to \pos_phy_l2l3\lib and click Open.
e. Click Add.
f. Click OK.
For the sink example, replace source with sink.
For the VHDL model, replace the verilog directory with the vhdl directory.
For the transmit test, replace mrx with mtx.
chapter in volume 3 of the Quartus II Handbook.
Preliminary
Simulating Altera IP in Third-Party
POS-PHY Level 2 and 3 Compiler User Guide
2–13