M38510/34901BCA E2V, M38510/34901BCA Datasheet - Page 3

• Manufacturer Part Number: M38510/34901BCA
• Manufacturer: E2V

Specifications of M38510/34901BCA

• Lead Free Status / RoHS Status: Supplier Unconfirmed

manufacturer authorized by the qualifying activity for listing on the applicable qualified manufacturers list before
contract award (see 4.3 and 6.4).
specified herein or as modified in the device manufacturer's Quality Management (QM) plan. The modification in the
QM plan shall not affect the form, fit, or function as described herein.
as specified in MIL-PRF-38535 and herein.
on figures 1 and 2.
the qualifying activity and the preparing activity upon request.
and apply over the full recommended case operating temperature range, unless otherwise specified.
specified in table II. The electrical tests for each subgroup are described in table III.
number 11 (see MIL-PRF-38535, appendix A).
or as modified in the device manufacturer's Quality Management (QM) plan. The modification in the QM plan shall
not effect the form, fit, or function as described herein.
to qualification and conformance inspection. The following additional criteria shall apply:
3. REQUIREMENTS
3.1 Qualification. Microcircuits furnished under this specification shall be products that are manufactured by a
3.2 Item requirements. The individual item requirements shall be in accordance with MIL-PRF-38535 and as
3.3 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be
3.3.1 Terminal connections and logic diagram. The terminal connections and logic diagram shall be as specified
3.3.2 Truth table. The truth table shall be as specified on figure 3.
3.3.3 Schematic circuits. The schematic circuits shall be maintained by the manufacturer and made available to
3.3.4 Case outlines. The case outlines shall be as specified in 1.2.3.
3.4 Lead material and finish. The lead material and finish shall be in accordance with MIL-PRF-38535 (see 6.6).
3.5 Electrical performance characteristics. The electrical performance characteristics are as specified in table I,
3.6 Electrical test requirements. The electrical test requirements for each device class shall be the subgroups
3.7 Marking. Marking shall be in accordance with MIL-PRF-38535.
3.8 Microcircuit group assignment. The devices covered by this specification shall be in microcircuit group
4. VERIFICATION
4.1 Sampling and inspection. Sampling and inspection procedures shall be in accordance with MIL-PRF-38535
4.2 Screening. Screening shall be in accordance with MIL-PRF-38535 and shall be conducted on all devices prior
a. The burn-in test duration, test condition, and test temperature, or approved alternatives shall be as
b. Interim and final electrical test parameters shall be as specified in table II, except interim electrical
c. Additional screening for space level product shall be as specified in MIL-PRF-38535.
specified in the device manufacturer's QM plan in accordance with MIL-PRF-38535. The burn-in test
circuit shall be maintained under document control by the device manufacturer's Technology Review
Board (TRB) in accordance with MIL-PRF-38535 and shall be made available to the acquiring or
preparing activity upon request. The test circuit shall specify the inputs, outputs, biases, and power
dissipation, as applicable, in accordance with the intent specified in test method 1015 of MIL-STD-883.
parameters test prior to burn-in is optional at the discretion of the manufacturer.
MIL-M-38510/349B
3