BOXD945GTPLKR Intel (CPU), BOXD945GTPLKR Datasheet - Page 16

no-image

BOXD945GTPLKR

Manufacturer Part Number
BOXD945GTPLKR
Description
Manufacturer
Intel (CPU)
Datasheet

Specifications of BOXD945GTPLKR

Lead Free Status / RoHS Status
Supplier Unconfirmed
Intel Desktop Board D945GTP Technical Product Specification
1.4 System Memory
16
The board has four DIMM sockets and support the following memory features:
NOTES
Table 4 lists the supported DIMM configurations.
Table 4.
Note: In the second column, “DS” refers to double-sided memory modules (containing two rows of SDRAM) and “SS” refers
INTEGRATOR’S NOTE
It is possible to install four 2048 MB (2 GB) modules for a total of 8 GB of system memory,
however, only 4 GB of address space is available. Refer to Section 2.2.1, on page 45 for additional
information on available memory.
DIMM
Capacity
128 MB
256 MB
256 MB
512 MB
512 MB
512 MB
1024 MB
1024 MB
2048 MB
1.8 V (only) DDR2 SDRAM DIMMs with gold-plated contacts
Unbuffered, single-sided or double-sided DIMMs with the following restriction:
Double-sided DIMMS with x16 organization are not supported.
4 GB maximum total system memory. Refer to Section 2.2.1 on page 45 for information on the
total amount of addressable memory.
Minimum total system memory: 128 MB
Non-ECC DIMMs
Serial Presence Detect
DDR2 667, DDR2 533, or DDR2 400 MHz SDRAM DIMMs
Remove the PCI Express x16 video card before installing or upgrading memory to avoid
interference with the memory retention mechanism.
To be fully compliant with all applicable DDR SDRAM memory specifications, the board
should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure.
This allows the BIOS to read the SPD data and program the chipset to accurately configure
memory settings for optimum performance. If non-SPD memory is installed, the BIOS will
attempt to correctly configure the memory settings, but performance and reliability may be
impacted or the DIMMs may not function under the determined frequency.
to single-sided memory modules (containing one row of SDRAM).
Supported Memory Configurations
DS
DS
Configuration
SS
SS
SS
SS
SS
SS
DS
SDRAM
Density
256 Mbit
256 Mbit
512 Mbit
256 Mbit
512 Mbit
1 Gbit
512 Mbit
1 Gbit
1 Gbit
SDRAM Organization
Front-side/Back-side
16 M x 16/empty
32 M x 8/empty
32 M x 16/empty
32 M x 8/32 M x 8
64 M x 8/empty
64 M x 16/empty
64 M x 8/64 M x 8
128 M x 8/empty
128 M x 8/128 M x 8
Number of SDRAM
Devices
4
8
4
16
8
4
16
8
16