V23818-M15-B57 Infineon Technologies, V23818-M15-B57 Datasheet - Page 18

• Manufacturer Part Number: V23818-M15-B57
• Manufacturer: Infineon Technologies

Specifications of V23818-M15-B57

• Optical Fiber Type: TX/RX
• Data Transfer Rate: 2125Mbps
• Jitter: 0.04ns
• Operating Temperature Classification: Commercial
• Peak Wavelength: 1360/1580nm
• Package Type: SFP
• Operating Supply Voltage (min): 3.1V
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.5V
• Output Current: 50mA
• Operating Temp Range: 0C to 70C
• Mounting: Snap in
• Pin Count: 20
• Lead Free Status / RoHS Status: Supplier Unconfirmed

V23818-M15-B57
Revision History:
Previous Version:
Page
For questions on technology, delivery and prices please contact the Infineon
Technologies Offices in Germany or the Infineon Technologies Companies and
Representatives worldwide: see our webpage at http://www.infineon.com.
Edition 2002-05-06
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81541 München, Germany
©
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide.
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life-support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.
Infineon Technologies AG 2002.
Subjects (major changes since last revision)
Document’s layout has been changed: 2002-Aug.
2002-05-06
DS0