FX2-68P-1.27DSL(71) HRS (HIROSE), FX2-68P-1.27DSL(71) Datasheet - Page 2

• Manufacturer Part Number: FX2-68P-1.27DSL(71)
• Description: HEADER, 1.27MM, R/A, 68WAY
• Manufacturer: HRS (HIROSE)

Specifications of FX2-68P-1.27DSL(71)

• Connector Type: Stacking
• Pitch Spacing: 1.27mm
• No. Of Contacts: 68
• Gender: Plug
• Contact Plating: Gold
• Row Pitch: 1.905mm
• No. Of Rows: 4
• Contact Termination: Through Hole
• Contact Material: Phosphor Bro
• Svhc: No SVHC
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A86
FX2 Series●1.27mm Pitch Multi-function Two Piece Connector
3. Board to board type
■Applications
■Product Specifications
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Note 3: Information contained in this catalog represents general requirements for this Series.Contact us for the drawings and specifications for
■Material
■Stacking Variation
1. Insulation Resistance
2. Withstanding Voltage
3. Contact Resistance
4. Vibration
5.
6. Temperature Cycle
7. Durability (Mating/un-mating) Contact resistance: 55 m ohms max.
8. Resistance to soldering heat
Insulator
Contact
q Flux swell prevention
w Stack height 12mm to 16mm
e Mis-insertion preventive mechanism
Computers, peripheral equipments, various machines etc.
Humidity (Steady state)
The straight through hole type takes the complete flux
tight action from the board back side at solder dipping.
The type is prepared, corresponding to whether or not
cleaning is required.
The board stack height can be set to every 1 mm unit up
to 12 to 16mm.
The mating area is designed in a mechanism so as to
prevent mis-insertion, and complete countermeasures
have been taken against wrenching.
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
a specific part number shown.
Rating
Item
Parts
Receptacle
SMT type
Dip type
Header
Socket
Socket
Current rating 0.5A
Voltage rating 125V AC Operating Humidity Range 40 to 80%
1000M ohms min
No flashover or insulation breakdown.
45m ohms max.
No electrical discontinuity of 1μs or more
Contact resistance: 55m ohms max. Insulation resistance: 100M ohms min.
Contact resistance: 55m ohms max.
Insulation resistance: 100M ohms min.
No damage, cracks, or parts looseness.
No deformation of components affecting performance.
Phosphor bronze or brass
Phosphor bronze
Header
PBT/Polyamid
SMT type
Dip type
Polyamid
Material
Specification
PPS
Operating Temperature Range -55ç to +85ç (Note 1) Storage Temperature Range -10ç to +60ç (Note 2)
FX2C-*P-1.27DSA(L)
FX2CA-*P-1.27DSA(L)
FX2CA1-*P-1.27DSA(L)
FX2CA2-*P-1.27DSA(L)
FX2-*P-1.27SV(L)
Receptacle
4. Board to cable type
5. SMT type
q Complete lock with easy operation
w Applicable cable
Strength security with metaltab
Selective gold plated
Employing the inner lock system, complete lock and eject
actions can be performed with easy operation.
The applicable cable is the <UL2651>AWG#28 flat cable
(7/0.127mm), and the jacket size is 0.9±0.1mm.
The right angle type is equipped with metaltab to secure
soldering strength, and constructed so as to fix by
screws. The straight type can choose whether or not
metaltab are required.
Light brown
250V DC
300V AC/1 minute
100mA
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-55ç: 30 minutes→15 to 35ç: 2 to 3 minutes →
(-85ç: 30 minutes→15 to 35ç: 2 to 3 minutes) 5 cycles
500 cycles
SMT Type
DIP Type
Finish
FX2C-*S-1.27DSA(L)
FX2CA-*S-1.27DSA(L)
Black
12.0
13.0
14.0
12.1
Reflow: At the recommended temperature profile
Manual soldering: 360ç for 5 seconds
Solder bath: 260ç for 10 seconds
Manual soldering: 360ç for 5 seconds
Storage Humidity Range 40 to 70%
Dip type
FX2C2-*S-1.27DSA(L)
FX2CA2-*S-1.27DSA(L)
Condition
14.0
15.0
16.0
14.1
________
UL94V-0
Remark
FX2-*S-1.27SV(L)
SMT type
12.2
13.2
14.2
12.3
(Note 2)
Unit:mm