NHD-3.12-25664UCB2 Newhaven Display, NHD-3.12-25664UCB2 Datasheet - Page 13

• Manufacturer Part Number: NHD-3.12-25664UCB2
• Description: LCD OLED GRAPHIC 256 X 64 BLUE
• Manufacturer: Newhaven Display

Specifications of NHD-3.12-25664UCB2

• Pixel Density: 256 x 64
• Viewing Area (w X H): 82 mm x 22 mm
• Operating Voltage: 2.5 V
• Operating Current: 47.7 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Illumination Color: Blue
• Viewing Angle: 80 deg
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Quality Information
High Temperature storage
Low Temperature storage
High Temperature
Operation
Low Temperature
Operation
High Temperature /
Humidity Operation
Thermal Shock resistance
Vibration test
Atmospheric Pressure test Test the endurance of the display by
Static electricity test
Note 1: No condensation to be observed.
Note 2: Conducted after 2 hours of storage at 25⁰C, 0%RH.
Note 3:
Evaluation Criteria:
1: Display is fully functional during operational tests and after all tests, at room temperature.
2: No observable defects.
3: Luminance >50% of initial value.
4: Current consumption within 50% of initial value
Precautions for using OLEDs/LCDs/LCMs
See Precautions at www.newhavendisplay.com/specs/precautions.pdf
Warranty Information and Terms & Conditions
http://www.newhavendisplay.com/index.php?main_page=terms
Newhaven Display International, Inc. reserves the right to alter this product or specification at any time without notification.
Test Item
Test performed on product itself, not inside a container
Test the endurance of the display at high
storage temperature.
Test the endurance of the display at low
storage temperature.
Test the endurance of the display by
applying electric stress (voltage & current)
at high temperature.
Test the endurance of the display by
applying electric stress (voltage & current)
at low temperature.
Test the endurance of the display by
applying electric stress (voltage & current)
at high temperature with high humidity.
Test the endurance of the display by
applying electric stress (voltage & current)
during a cycle of low and high
temperatures.
Test the endurance of the display by
applying vibration to simulate
transportation and use.
applying atmospheric pressure to simulate
transportation by air.
Test the endurance of the display by
applying electric static discharge.
Content of Test
[13]
.
+90⁰C , 240hrs
‐40⁰C , 240hrs
+85⁰C 240hrs
‐40⁰C , 240hrs
+60⁰C , 90% RH , 240hrs
‐40⁰C,30min ‐> 25⁰C,5min ‐>
85⁰C,30min = 1 cycle
100 cycles
10‐22Hz , 15mm amplitude.
22‐500Hz, 1.5G
30min in each of 3 directions
X,Y,Z
115mbar, 40hrs
VS=800V, RS=1.5kΩ, CS=100pF
One time
Test Condition
Note
2
1,2
2
1,2
1,2
3
3