LFXP2-5E-6QN208C Lattice, LFXP2-5E-6QN208C Datasheet - Page 20

• Manufacturer Part Number: LFXP2-5E-6QN208C
• Description: IC DSP 5KLUTS 146I/O 208PQFP
• Manufacturer: Lattice

Specifications of LFXP2-5E-6QN208C

• Number Of Logic Elements/cells: *
• Number Of Labs/clbs: *
• Total Ram Bits: 169984
• Number Of I /o: 146
• Number Of Gates: -
• Voltage - Supply: 1.14 V ~ 1.26 V
• Mounting Type: *
• Operating Temperature: 0°C ~ 85°C
• Package / Case: *
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 220-1102

Lattice Semiconductor
Figure 2-16. FlashBAK Technology
Memory Cascading
Larger and deeper blocks of RAMs can be created using EBR sysMEM Blocks. Typically, the Lattice design tools
cascade memory transparently, based on specific design inputs.
Single, Dual and Pseudo-Dual Port Modes
In all the sysMEM RAM modes the input data and address for the ports are registered at the input of the memory
array. The output data of the memory is optionally registered at the output.
EBR memory supports two forms of write behavior for single port or dual port operation:
1. Normal – Data on the output appears only during a read cycle. During a write cycle, the data (at the current
2. Write Through – A copy of the input data appears at the output of the same port during a write cycle. This
Memory Core Reset
The memory array in the EBR utilizes latches at the A and B output ports. These latches can be reset asynchro-
nously or synchronously. RSTA and RSTB are local signals, which reset the output latches associated with Port A
and Port B respectively. GSRN, the global reset signal, resets both ports. The output data latches and associated
resets for both ports are as shown in Figure 2-17.
Figure 2-17. Memory Core Reset
address) does not appear on the output. This mode is supported for all data widths.
mode is supported for all data widths.
FPGA Logic
GSRN
RSTA
RSTB
Make Infinite Reads and
Writes to EBR
Programmable Disable
EBR
Memory Core
2-17
Flash
Output Data
L
L
D
D
Latches
CLR
CLR
EBR During Configuration /
SET
SET
Write From EBR to Flash
Q
Q
Write to Flash During
Write From Flash to
on User Command
Programming
LatticeXP2 Family Data Sheet
JTAG / SPI Port
Port A[17:0]
Port B[17:0]
Architecture