SJ5908 3M, SJ5908 Datasheet - Page 6

• Manufacturer Part Number: SJ5908
• Description: BUMPON ROLL 3.2MM 9"X36YD BLACK
• Manufacturer: 3M
• Series: SJ-5900r

Specifications of SJ5908

• Shape: Rectangular, Flat - Customizable
• Color: Black
• Size: Roll - 108' L x 9.000" W x 0.125" H (32.92m x 228.60mm x 3.18mm) 1/8" H
• Size - Visible: Roll - 108' L x 9.000" W x 0.125" H (32.92m x 228.60mm x 3.18mm) 1/8" H
• Mounting Type: Adhesive - Acrylic
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 00-021200-86304-2; 70-0704-2858-9

Bumpon™ Resilient Rollstock
SJ-5800 SJ-5900 SJ-6000 SJ-6200 Series
Die Cutting Considerations
Die Cut Examples
Technical Information and
Data
Product Use
Limited Warranty and
Limited Remedy
Limitation of Liability
Industrial Tape and Specialties Division
3M Center, Building 220-7W-03
St. Paul, MN 55144-1000
1 800 722 5463
1 800 223 7427 Fax on Demand
www.3M.com/industrialtape
!
!
!
!
Bumpon Rollstock products can be die cut to a variety of shapes and sizes. The following examples
illustrate just a few of the possibilities.
The technical information and data, recommendations, and other statements provided in this document are based on
tests or experience which 3M believes to be reliable, but the accuracy or completeness of such information is not
guaranteed.
Please remember that many factors can affect the use and performance of a 3M product in a particular application. The
materials to be used with the 3M product, the surface preparation of those materials, the product selected for use, the
conditions in which the product is used, and the time and environmental conditions in which the product is expected to
perform are among the many factors that can affect the use and performance of a 3M product. Given the variety of
factors that can affect the use and performance of a 3M product, some of which are uniquely within the user’s
knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular
purpose and suitable for the user’s method of application.
The 3M product will be free from defects in material and manufacture for a period of one (1) year from the date of
manufacture. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR
ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE.
User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s method
of application. If the 3M product is defective within the warranty period stated above, YOUR EXCLUSIVE REMEDY
AND 3M’S SOLE OBLIGATION SHALL BE, AT 3M’S OPTION, TO REPLACE OR REPAIR THE 3M PRODUCT
OR REFUND THE PURCHASE PRICE OF THE 3M PRODUCT.
Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether
direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including, but not limited to,
contract, warranty, negligence, or strict liability.
This Industrial Tape and Specialties Division product was manufactured under a 3M quality system registered to ISO
9002 standards.
It is very important that knives be sharp.
Although rotary die cutting can be used for thicker materials ( 1/16 inches), distortion in the die cut shape is
probably using this die cutting method. Flat bed die cutting is recommended for thicker materials.
The R-25 (synthetic rubber) adhesive system is very firm (tough). It can be more difficult to die cut versus the R-
30 and A-20 adhesive systems. Also, the R-25 adhesive system is inherently stringy; as a result, if the adhesive is
not thoroughly cut, the adhesive may have a tendency to string-out when the die cut parts are removed from the
release liner quickly or by using a snapping motion. The adhesive string-out will not diminish the performance of
the product.
Some re-welding (tendency of the adhesive system to flow back together after die cutting) is possible with the R-
25 adhesive system. Exposure to high temperatures (greater than the recommended storage temperature of 60 F to
80 F) in combination with time and pressure will increse the tendency of re-welding.
All rights reserved.
Printed in U.S.A.
© 3M IPC 2001
Page 6 of 6
70-0709-4504-6
April 16, 2001