703DR001048150D10023 Curtis Instruments Inc, 703DR001048150D10023 Datasheet - Page 10
![LCD COUNTER ACDC PNL MNT W/RESET](/photos/6/45/64505/703dr00101248d2060a__703dr001048150d100230a_fig_3_sml.jpg)
703DR001048150D10023
Manufacturer Part Number
703DR001048150D10023
Description
LCD COUNTER ACDC PNL MNT W/RESET
Manufacturer
Curtis Instruments Inc
Series
703r
Specifications of 703DR001048150D10023
Count Rate
500Hz
Number Of Digits/alpha
6
Input Type
Voltage
Voltage - Supply
48 V ~ 150 V
Display Type
LCD Non-Backlit
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Output Type
-
Other names
17305454
267-1008
703DE001048150D10023
703DR001048150D10023A
703DR48150D100230A
267-1008
703DE001048150D10023
703DR001048150D10023A
703DR48150D100230A
4. OPERATION
NOTE: All models display an 8 in all digits for
1 sec. at power-up.
700 Hour Meter (AC/DC)
To Display & Operate: Apply DC+ or AC hot to pin 1 and DC–
or AC neutral to pin 2. The accumulation of elapsed time is
indicated by the flashing hourglass icon. If power has been
applied for 5 seconds minimum, the accumulated time will be
stored in non-volatile memory when power is removed.
To Reset: (for Resettable Models) Apply DC+ or AC hot to pin
4 for
for 5 seconds minimum. The reset voltage must be at the
same level as the voltage used to power the unit.
701 Hour Meter (AC/DC or DC Only)
To Display: Apply DC+ or AC hot to pin 1 and DC– or AC neutral to
pin 2. The display is activated at this point but the elapsed time
will not be accumulated until a signal is applied to pin 3.
Note, for proper operation: Power must be applied to pins 1
& 2 before or coincident with pin 3.
To Operate: Apply DC+ or AC hot to pin 3 for
minimum (AC/DC model) or DC+ for 1 millisecond mimimum
(DC Only model). The accumulation of elapsed time is indicated
by the flashing hourglass icon. If power (pins 1 & 2) has been
1
/
2
second minimum while power (pins 1 & 2) is applied
16
1
/
2
second
!
applied for 5 seconds minimum, the accumulated
time will be stored in non-volatile memory when
power is removed.
To Reset: (for Resettable Models) Apply DC+ or AC
hot to pin 4 for
& 2) is applied for 5 seconds minimum. The reset voltage must
be at the same level as the voltage used to power the unit.
703 Counter (AC/DC or DC Only)
To Display: Apply DC+ or AC hot to pin 1 and DC– or AC
neutral to pin 2. The display is activated at this point but the
count will not be started until a signal is applied to pin 3.
Note, for proper operation: Power must be applied to pins 1
& 2 before or coincident with pin 3.
To Operate: Apply DC+ or AC hot to pin 3. The count is
incremented when the input signal is removed from pin 3. The
input signal must be applied for
model) or for 1 millisecond mimimum (DC Only model). If
power (pins 1 & 2) has been applied for 5 seconds minimum,
the incremented count will be stored in non-volatile memory
when power is removed.
To Reset: (for Resettable Models) Apply DC+ or AC hot to
pin 4 for
applied for 5 seconds minimum. The reset voltage must be at
the same level as the voltage used to power the unit.
1
/
2
second minimum while power (pins 1 & 2) is
1
/
2
second minimum while power (pins 1
17
1
/
2
second minimum (AC/DC
!