H7AN-RT8-AC100-240 Omron, H7AN-RT8-AC100-240 Datasheet - Page 18
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
H7AN-RT8-AC100-240
Manufacturer Part Number
H7AN-RT8-AC100-240
Description
COUNTER DIGITAL LED 100-240V
Manufacturer
Omron
Datasheet
1.H7AN-RT8-AC100-240.pdf
(20 pages)
Specifications of H7AN-RT8-AC100-240
Count Rate
*
Number Of Digits/alpha
*
Input Type
*
Output Type
*
Voltage - Supply
*
Display Type
*
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
H7ANRT8AC100240
• The following timing chart shows how the H7AN indicates when
• To mount the casing on the digital counter, insert the digital counter
Retaining Data during Power Interruptions
Data is written to EEPROM when the power is turned OFF. The write
life is 1,000,000 writes min.
Self-diagnosis
The following indications will be made when an error occurs.
Try correcting the error by cycling the power supply. If the indications
do not change, try inputting the reset signal. If that does not work, the
Counter will need to be repaired. If normal operation is recovered, it
might have been caused by noise. Check for noise generation.
Changes in Specifications
This product was upgraded in January 2006. The main changes are
described below.
1. Maximum Counting Speeds
2. Addition of Setting to Enable/Disable Data Backup for Power
3. Changes in Functions Allocated to Function Setting Switches
e1
e2
e3
7-segment
there is an external or manual reset input.
body into the casing by hand as far as possible and then tighten the
mounting screw. Press by the hand the front panel as indicated by
the arrow so that the screw will tighten securely.
display
A DIP switch on models with 4, 6, or 8 digits could be used to set
the maximum counting speed to 3 kHz, 5 kHz, or 30 kHz. The
upgraded models have been changed so the maximum counting
speed can be set to 5 kHz or 30 kHz.
Interruptions
On models that back up data when power is turned OFF (models
with model numbers ending in “-M”), a DIP switch setting has
been provided to enable or disable backup.
Some of the functions allocated to the DIP switches have been
changed to allow for the changes described in 1 and 2, above.
Reset
indicator
Count
display
Reset
OFF
OFF
OFF
indicator
Reset
Display
before
reset
ON
OFF
ON
OFF
OFF
OFF
OFF
Count-out
indicator
Off
CPU error
RAM
memory
error
EEPROM
memory
error
Error
Display
after reset
OFF
OFF
OFF
Output
status
H7AN
18