H7CX-A4W AC100-240 Omron, H7CX-A4W AC100-240 Datasheet - Page 34

• Manufacturer Part Number: H7CX-A4W AC100-240
• Description: COUNTER SCREW-TERM 4DIGIT SPDT
• Manufacturer: Omron
• Series: H7CXr

Specifications of H7CX-A4W AC100-240

• Count Rate: *
• Number Of Digits/alpha: 6
• Input Type: *
• Output Type: *
• Voltage - Supply: 100 V ~ 240 VAC
• Display Type: *
• No. Of Digits / Alpha: 4
• Meter Function: Counter
• Signal Input Type: PNP/NPN
• Supply Voltage Max: 240VAC
• Character Size: 11.5mm
• Ip/nema Rating: IP66 / NEMA 4
• Panel Cutout Height: 45mm
• Supply Voltage Min: 100VAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: H7CX-A4WAC100-240; H7CXA4WAC100240

Operation in Run Mode
Self-diagnostic Function
The following displays will appear if an error occurs.
Note: 1. Includes the case where the EEPROM has reached its overwrite lifetime.
ffffff
(See note 3.)
e1
e2
e2
Main display
2. Occurs when the measurement value reaches 999,999.
3. Display flashes (1-second cycles).
Set values for each digit as required using the
No change
Not lit
Not lit
sum
Sub-display
Measurement value overflow
(See note 2.)
CPU
Memory error (RAM)
Memory error (EEP)
(See note 1.)
OUT1 set value
Measurement value
OUT2 set value
Measurement value
Measurement value
Error
No change
OFF
OFF
OFF
Output status
key.
Measurement Value
Displays the currently measured value.
OUT1/OUT2 Set Value
Set OUT1 set value and OUT2 set value. The
measurement value is compared to OUT1 set value
and OUT2 set value and output is made according to
the selected output mode.
Measurement value ≤ 999999
Either press the reset key or reset the
power supply.
Reset the power supply.
Reset to the factory settings using the
reset key.
Correction method
No change
No change
No change
0
Set value after
H7CX-A
reset
34