ICS557G-08T IDT, Integrated Device Technology Inc, ICS557G-08T Datasheet - Page 4

• Manufacturer Part Number: ICS557G-08T
• Description: IC MUX 2:1 PCI EXPRESS 16-TSSOP
• Manufacturer: IDT, Integrated Device Technology Inc
• Type: Clock Multiplexerr

Specifications of ICS557G-08T

• Input: HCSL, LVDS
• Output: HCSL, LVDS
• Frequency - Max: 200MHz
• Voltage - Supply: 3.135 V ~ 3.465 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 16-TSSOP
• Frequency-max: 200MHz
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 557G-08T

Output Structures
General PCB Layout Recommendations
For optimum device performance and lowest output phase
noise, the following guidelines should be observed.
1. Each 0.01µF decoupling capacitor should be mounted on
the component side of the board as close to the VDD pin as
possible.
2. No vias should be used between decoupling capacitor
and VDD pin.
3. The PCB trace to VDD pin should be kept as short as
possible, as should the PCB trace to the ground via.
Distance of the ferrite bead and bulk decoupling from the
device is less critical.
4. An optimum layout is one with all components on the
same side of the board, minimizing vias through other signal
layers (any ferrite beads and bulk decoupling capacitors can
be mounted on the back). Other signal traces should be
routed away from the ICS557-08.This includes signal traces
just underneath the device, or on layers adjacent to the
ground plane layer used by the device.
IDT® 2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS
ICS557-08
2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS
R
=2.3 mA
R
IREF
475
Ω
See Output Termination
Sections - Pages 3 ~ 5
6*IREF
4
ICS557-08
PCIE MULTIPLEXER
REV J 121510