ICS9155C-01CW20LFT IDT, Integrated Device Technology Inc, ICS9155C-01CW20LFT Datasheet - Page 12

• Manufacturer Part Number: ICS9155C-01CW20LFT
• Description: IC FREQUENCY GENERATOR 20-SOIC
• Manufacturer: IDT, Integrated Device Technology Inc
• Type: Frequency Generatorr

Specifications of ICS9155C-01CW20LFT

• Input: Clock, Crystal
• Output: Clock
• Frequency - Max: 220MHz
• Voltage - Supply: 3 V ~ 5.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 20-SOIC
• Frequency-max: 220MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 9155C-01CW20LFT

AV9155C
AV9155C Recommended Board Layout
This is the recommended layout for the AV9155C to maximize clock performance. Shown are the power and ground
connections, the ground plane, and the input/output traces.
Use of the isolated ground plane and power connection, as shown, will prevent stray high frequency ground and system noise
from propagating through the device. When compared to using the system ground and power planes, this technique will
minimize output clock jitter. The isolated ground plane should be connected to the system ground plane at one point, near the
2.2µF decoupling cap. For lowest jitter performance, this isolated ground plane should be kept away from clock output pins
and traces. Keeping the isolated ground plane area as small as possible will minimize EMI radiation. Use a sufficient gap
between the isolated ground plane and system ground plane to prevent AC coupling. The ferrite bead in the VDD line optional,
but will help reduce EMI.
The traces to distribute the output clocks should be over a system ground or power supply plane. The trace width should be about
two times the thickness of the PC board between the trace and the underlying plane. These guidelines help minimize clock jitter
and EMI radiation. The traces to distribute power should be as wide as possible.
12