ICS9179BF-01 IDT, Integrated Device Technology Inc, ICS9179BF-01 Datasheet - Page 3

• Manufacturer Part Number: ICS9179BF-01
• Description: IC CLOCK BUFFER SDRAM 48-SSOP
• Manufacturer: IDT, Integrated Device Technology Inc
• Type: Fanout Buffer (Distribution)r

Specifications of ICS9179BF-01

• Number Of Circuits: 1
• Ratio - Input:output: 1:18
• Differential - Input:output: No/No
• Input: Clock
• Output: Clock
• Frequency - Max: 150MHz
• Voltage - Supply: 3.135 V ~ 3.465 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 48-SSOP
• Frequency-max: 150MHz
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 9179BF-01

ICS9179B-01
Technical Pin Function Descriptions
VDD
This is the power supply to the internal core logic of the
device as well as the clock output buffers for
SDRAM(0:17).
This pin operates at 3.3V volts. Clocks from the listed
buffers that it supplies will have a voltage swing from
Ground to this level. For the actual guaranteed high and
low voltage levels for the Clocks, please consult the DC
parameter table in this data sheet.
GND
This is the power supply ground (common or negative)
return pin for the internal core logic and all the output
buffers.
SDRAM(0:17)
These Output Clocks are use to drive Dynamic RAM’s
and are low skew copies of the CPU Clocks. The voltage
swing of the SDRAM’s output is controlled by the supply
voltage that is applied to VDD of the device, operates at
3.3 volts.
2
I
C
The SDATA and SCLOCK Inputs are use to program the
device. The clock generator is a slave-receiver device in
2
the I
C protocol. It will allow read-back of the registers.
2
See configuration map for register functions. The I
C
2
specification in Philips I
C Peripherals Data Handbook
(1996) should be followed.
BUF_IN
Input for Fanout buffers (SDRAM 0:17).
OE
OE tristates all outputs when held low.
VDDS
2
This is the power supply to I
C circuitry.
GNDS
2
This is the ground to I
C circuitry.
3