FS6370-01G-XTP ON Semiconductor, FS6370-01G-XTP Datasheet - Page 27

• Manufacturer Part Number: FS6370-01G-XTP
• Description: IC CLOCK GEN PLL EEPROM 16SOIC
• Manufacturer: ON Semiconductor
• Type: PLL Clock Generatorr

Specifications of FS6370-01G-XTP

• Pll: Yes
• Input: Crystal
• Output: CMOS
• Number Of Circuits: 1
• Ratio - Input:output: 1:4
• Differential - Input:output: No/No
• Frequency - Max: 230MHz
• Divider/multiplier: Yes/No
• Voltage - Supply: 3 V ~ 5.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 16-SOIC (3.9mm Width)
• Frequency-max: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

FS6370
Figure 16: Post Divider Menu
Click on PLL C1 to open the PLL screen. Set a desired frequency, however, now choose the post divider B as the output divider. Notice
the post divider box has split in two (as shown in Figure 16). The post divider B box now shows that the divider is dependent on the
setting of the SEL_CD pin for as long as mux B is the PLL C output.
Clicking on post divider A reveals a pull-down menu provided to permit adjustment of the post divider value independently of the PLL
screen. A typical menu is shown in Figure 16. The range of possible post divider values is also given in Table 7.
The EEPROM settings are shown to the left in the screen shown in Figure 14. Clicking on a register location displays a screen shown in
Figure 17. Individual bits can be poked, or the entire register value can be changed.
Figure 17: Register Screen
Rev. 3 | Page 27 of 28 | www.onsemi.com