LMX2352TM/NOPB National Semiconductor, LMX2352TM/NOPB Datasheet - Page 17

• Manufacturer Part Number: LMX2352TM/NOPB
• Description: IC FREQ SYNTHESIZER DUAL 24TSSOP
• Manufacturer: National Semiconductor
• Series: PLLatinum™r
• Type: PLL Frequency Synthesizerr

Specifications of LMX2352TM/NOPB

• Pll: Yes with Bypass
• Input: CMOS, TTL
• Output: CMOS
• Number Of Circuits: 1
• Ratio - Input:output: 3:3
• Differential - Input:output: Yes/No
• Frequency - Max: 1.2GHz, 550MHz
• Divider/multiplier: Yes/No
• Voltage - Supply: 2.7 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 24-TSSOP
• Frequency-max: 1.2GHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: *LMX2352TM; *LMX2352TM/NOPB; LMX2352TM

Programming Description
4.4.1 Programmable CMOS Output Truth Table
When the FastLock bit is set to one, OUT_0 and OUT_1 are don’t care bits. FastLock mode utilizes the OUT0 and OUT1 output
pins to synchronously switch between active low and TRI-STATE. The OUT0 = LOW state occurs whenever the RF loop’s CP_8X
is selected HIGH while the FastLock bit is set HIGH (see programming description 3.2.2). The OUT0 pin reverts to TRI-STATE
when the CP_8X bit is LOW. Similarly for the IF loop, the synchronous activation of OUT1= LOW or TRI-STATE, is dependent on
whether the CP_GAIN_8 is high or low respectively (see programming description 3.1.4).
4.5 SERIAL DATA INPUT TIMING
Note: Data shifted into register on clock rising edge. Data is shifted in MSB first.
FastLock
TEST CONDITIONS: The Serial Data Input Timing is tested using a symmetrical waveform around Vcc/2. The test waveform has an edge rate of 0.6 V/nsec
with amplitudes of 2.2V
OUT_0
OUT_1
BIT
LOCATION
@
IF_N[17]
IF_N[18]
IF_N[20]
Vcc=2.7 V and 2.6V
@
OUT0 CMOS output pin level
OUT1 CMOS output pin level
Vcc = 5.5 V.
(Continued)
FastLock mode select
FUNCTION
set
set
17
CMOS output
LOW
LOW
0
FastLock mode
DS100831-3
HIGH
HIGH
1
www.national.com