1-406372-0 TE Connectivity, 1-406372-0 Datasheet - Page 4

• Manufacturer Part Number: 1-406372-0
• Description: 110 MJ ASSY,RJ45,UNIV,CAT5
• Manufacturer: TE Connectivity
• Series: 110Connectr

Specifications of 1-406372-0

• Product Type: Connector - Modular
• Jack Type: RJ45
• Wiring Pattern: Universal
• Termination Style: 110 Style Punch-Down
• Keyed: No
• Performance Category: Cat 5e
• Stuffer Cap Material: Polyphenylene Oxide
• Stuffer Cap Color: Gray
• Shielded: No
• Solder Tail Contact Plating: Tin-Lead over Nickel
• Number Of Positions: 8
• Netconnect Select System: Yes
• Conductor O.d. (mm [in]): 1.27 [0.050]
• Mount Type: Panel Mount
• Wire Range (solid) (mm [awg]): 22-26
• Wire Range (stranded) (mm² [awg]): 22-26
• 110 Block Material: Polycarbonate
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold
• Contact Plating, Mating Area, Thickness (µm [?in]): 1.27 [50]
• Housing Color: Violet
• Housing Material: Polyphenylene Oxide
• Ul Flammability Rating: UL 94V-0
• Dust Cover: Without
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C
• Rohs/elv Compliance History: Converted to comply with RoHS directive
• Packaging Method: Poly Bag
• Packaging Quantity: 1

Rev B
Housing panel retention.
Thermal shock.
Humidity-temperature cycling.
Mixed flowing gas.
Temperature life.
NOTE
Test Description
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests specified in Test Sequence in Figure 2.
20 pounds minimum.
Insulation resistance. Termination
resistance, dry circuit final.
See Note.
Insulation resistance within 30
minutes after final cycle.
Termination resistance, dry circuit
final. 500 vac dielectric withstanding
voltage during final cycle. 5 second
hold.
See Note.
Termination resistance, dry circuit
final.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
TE Spec 109-49.
Measure panel retention force at a
rate of .5 inch per minute using
nominal panel cutout dimensions as
specified in AMP Customer
Drawing.
TE Spec 109-22.
Subject mated plug and jack to 25
cycles between -40 and 70° C.
TE Spec 109-76-2.
Subject mated plug and jack to 10
humidity-temperature cycles
between 4 and 60° C at 95% RH.
TE Spec 109-85-2.
Subject mated plug and jack to
environmental class II for 20 days.
TE Spec 109-43.
Subject mated plug and jack to
temperature life at 70° C for 1000
hours duration.
Procedure
108-1389
4 of 6