1-5111595-9 TE Connectivity, 1-5111595-9 Datasheet - Page 3

• Manufacturer Part Number: 1-5111595-9
• Description: 068 ASSY SYS 50 PADDLEBOARD
• Manufacturer: TE Connectivity

Specifications of 1-5111595-9

• Type Of Connector: Paddleboard
• Connector Type: Connector Assembly
• Mating Connector Lock: Without
• Wire/cable Type: Ribbon Cable
• Mount Angle: Vertical
• Pcb Mount Retention: Without
• Cover Material: Polyester
• Voltage (vac): 30
• Insulation Resistance (m?): 5,000
• Contact - Rated Current (a): 0.5
• Termination Post Length (mm [in]): 2.54 [0.100]
• Number Of Positions: 68
• Ribbon Cable Centerline Spacing (mm [in]): 0.64 [0.025]
• Contact Termination Type: Through Hole
• Contact Base Material: Copper Alloy
• Contact Plating, Mating Area, Material: Tin
• Housing Material: Liquid Crystal Polymer (LCP)
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• Temperature Range (°c): -65 – +105

Rev B
Mechanical shock.
Durability (receptacles).
Mating force (receptacles).
Unmating force (receptacles).
Thermal shock.
Humidity-temperature cycling.
Temperature life.
Mixed flowing gas (receptacles).
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
2.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
1.11 N [4 oz] maximum per contact. EIA-364-13.
0.14 N [.5 oz] minimum per contact. EIA-364-13.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
EIA-364-27,
Method A.
Subject mated specimens to 50 G's
half-sine shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 4.
EIA-364-9.
Mate and unmate specimens for
150 cycles at a maximum rate of
150 cycles per hour.
Measure force necessary to mate
specimens at a maximum rate of
12.7 mm [.5 in] per minute.
Measure force necessary to
unmate specimens at a maximum
rate of 12.7 mm [.5 in] per minute.
EIA-364-32,
Test Condition II.
Subject unmated specimens to 5
cycles between -65 and 105° C.
EIA-364-31,
Method III.
Subject unmated specimens to 10
cycles (10 days) between 25 and
65° C at 80 to 100% RH.
EIA-364-17,
Method A,
Test Condition 4,
Test Time Condition C.
Subject mated and terminated
specimens to 105° C for 500 hours.
EIA-364-65,
Class II.
Subject mated specimens to
environmental Class II for 20 days.
Procedure
108-1109
3 of 6