1375961-2 TE Connectivity, 1375961-2 Datasheet - Page 2

• Manufacturer Part Number: 1375961-2
• Description: PC104 CONN NONSTKTHRGH 2 STDOF
• Manufacturer: TE Connectivity

Specifications of 1375961-2

• Rohs Compliant: NO
• Product Type: Non-Stackthrough
• Termination Style: Screw
• Housing Material: Nylon, Glass Filled
• Contact Material: Phosphor Bronze
• Contact Plating: Gold
• Number Of Standoffs: 2
• Pitch: 2.54 mm
• Keyed: No
• Pcb Mount Style: Through Hole
• Board Standoff: With
• Screw Material: Steel
• Gender: Receptacle
• Screw Plating: Zinc Chromate
• Signal Contact Current (a): 3
• Insulation Resistance (m?): 1,000
• Dielectric Withstanding Voltage (v): 500
• Termination Post Length (mm [in]): 3.02 [0.119]
• Number Of Positions: 104
• Number Of Loaded Positions: 104
• Centerline (mm [in]): 2.54 [0.100]
• Pcb Mount Retention Type: None
• Contact Configuration: Non-Stackthrough
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Wave solder capable to 240°C
• Temperature Range (°c): -55 – +105
• Lead Free Status / Rohs Status: No

3.3.
3.4.
3.5.
Rev C
Initial examination of product.
Final examination of product.
Low level contact resistance.
Insulation resistance.
Withstanding voltage.
Vibration, random.
Mechanical shock, specified pulse.
Ratings
!
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per EIA-364.
Test Requirements and Procedures Summary
Test Description
Current: Signal application only, 2 amperes maximum when fully energized
Temperature: -55 to 105° C
Meets requirements of product
drawing.
Meets visual requirements.
30 milliohms maximum initial.
∆R 10 milliohms maximum.
1,000 megohms minimum.
500 volts AC at sea level.
1 minute hold with no breakdown or
flashover.
No discontinuities of 1 microsecond
or longer duration.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
EIA-364.
Visual and dimensional inspection
per product drawing.
EIA-364.
Visual inspection.
EIA-364-23.
Subject specimens to 100
milliamperes maximum and 20
millivolts maximum open circuit
voltage.
See Figure 3.
EIA-364-21.
Test between adjacent contacts of
mated specimens.
EIA-364-20.
Test between adjacent contacts of
mated specimens.
EIA-364-28, Condition VII, Level F.
Subject mated specimens to 6.93
G's rms between 20-500 Hz. 20
sweeps. 15 minutes duration.
See Figure 4.
EIA-364-27, Condition H.
Subject mated specimens to 30 G's
half-sine shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 4.
Procedure
108-1956
2 of 6