M41T11M6F STMicroelectronics, M41T11M6F Datasheet - Page 5

• Manufacturer Part Number: M41T11M6F
• Description: IC RTC SRL 512BIT 8SOIC
• Manufacturer: STMicroelectronics
• Type: Clock/Calendar/NVSRAMr

Specifications of M41T11M6F

• Memory Size: 56B
• Time Format: HH:MM:SS (24 hr)
• Date Format: YY-MM-DD-dd
• Interface: I²C, 2-Wire Serial
• Voltage - Supply: 2 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• Bus Type: Serial (2-Wire, I2C)
• User Ram: 64Byte
• Operating Supply Voltage (typ): 2.5/3.3/5V
• Package Type: SOIC
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 2V
• Operating Temperature Classification: Industrial
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Pin Count: 8
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-4699-2

M41T11
1
Caution:
Description
The M41T11is a low-power serial real time clock with 56 bytes of NVRAM. A built-in
32.768 kHz oscillator (external crystal controlled) and the first 8 bytes of the RAM are used
for the clock/calendar function and are configured in binary coded decimal (BCD) format.
Addresses and data are transferred serially via a two-line bidirectional bus. The built-in
address register is incremented automatically after each write or read data byte.
The M41T11 clock has a built-in power sense circuit which detects power failures and
automatically switches to the battery supply during power failures. The energy needed to
sustain the RAM and clock operations can be supplied from a small lithium coin cell.
Typical data retention time is in excess of 5 years with a 50 mA/h 3 V lithium cell. The
M41T11 is supplied in 8-lead plastic small outline package or 28-lead SNAPHAT
The 28-pin, 330 mil SOIC provides sockets with gold plated contacts at both ends for direct
connection to a separate SNAPHAT housing containing the battery and crystal. The unique
design allows the SNAPHAT battery package to be mounted on top of the SOIC package
after the completion of the surface mount process. Insertion of the SNAPHAT housing after
reflow prevents potential battery and crystal damage due to the high temperatures required
for device surface-mounting. The SNAPHAT housing is keyed to prevent reverse insertion.
The SOIC and battery/crystal packages are shipped separately in plastic anti-static tubes or
in tape & reel form.
For the 28-lead SOIC, the battery/crystal package (i.e. SNAPHAT) part number is “M4Txx-
BR12SH” (see
Do not place the SNAPHAT battery/crystal package “M4Txx-BR12SH” in conductive foam
since this will drain the lithium button-cell battery.
Figure 1.
Logic diagram
Table 16 on page
OSCI
SCL
27).
V CC
V SS
M41T11
V BAT
OSCO
SDA
FT/OUT
AI01000
Description
®
package.
5/30