2-103639-9 TE Connectivity, 2-103639-9 Datasheet - Page 3

• Manufacturer Part Number: 2-103639-9
• Description: 10 MTE HDR SRST LATCH .100CL
• Manufacturer: TE Connectivity

Specifications of 2-103639-9

• Product Type: Connector
• Connector Type: Header
• Post Size (mm [in]): 0.64 [.025]
• Pcb Mounting Orientation: Vertical
• Termination Method To Wire/cable: Crimp, Insulation Displacement Crimp (IDC)
• Pcb Mount Style: Through Hole
• Pcb Mount Retention: Without
• Connector Series: MTE
• Solder Tail Contact Plating: Bright Tin
• Centerline (mm [in]): 2.54 [0.100]
• Row-to-row Spacing (mm [in]): 2.54 [0.100]
• Number Of Positions: 10
• Number Of Rows: 1
• Contact Type: Pin
• Pcb Orientation Feature: No
• Contact Plating, Mating Area, Material: Bright Tin
• Contact Base Material: Brass
• Contact Shape: Square
• Connector Style: Plug
• Mating Alignment: With
• Mating Alignment Type: Latched
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Housing Material: Thermoplastic - GF
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Operating Temperature (°c): -65 – +105
• Applies To: Printed Circuit Board
• Packaging Method: Tube

Rev C
Mating force.
Unm ating force.
Contact retention.
Therm al shock.
Hum idity-tem perature cycling.
Tem perature life.
Mixed flowing gas.
NOTE
Test Description
(a)
(b)
Shall meet visual requirements, show no physical damage and shall meet the requirements of
additional tests as specified in the Test Sequence in Figure 2.
Details of test contained in Engineering Report 502-1056.
9 ounces m axim um for gold plating.
14 ounces m axim um for tin-lead
plating.
1 ounce m inim um .
3 pounds m inim um per contact.
See Note (b).
See Note (a).
See Note (a).
See Note (a).
See Note (a).
ENVIRONMENTAL
Figure 1 (end)
Requirem ent
TE Spec 109-42, Condition A.
Measure force necessary to m ate
sam ples with locking latches
rem oved at m axim um rate of .5
inch per m inute.
TE Spec 109-42, Condition A.
Measure force necessary to
unm ate sam ples with locking
latches rem oved at m axim um rate
of .5 inch per m inute.
TE Spec 109-30.
TE Spec 109-22.
Subject m ated sam ples to 5 cycles
between -65 and 105 C.
TE Spec 109-23-4, Condition B.
Subject m ated sam ples to 10
cycles between 25 and 65 C at
95% RH with cold shock.
TE Spec 109-43.
Subject m ated sam ples to
tem perature life at 105 C for 500
hours.
TE Spec 109-85-2.
Subject m ated sam ples to
environm ental class II for 14 days.
Procedure
108-25034
3 of 6