2-964296-1 TE Connectivity, 2-964296-1 Datasheet - Page 4

• Manufacturer Part Number: 2-964296-1
• Description: FLACHSTECKER2,8X0,8
• Manufacturer: TE Connectivity
• Series: Junior-Power-Timer (JPT), Multiple Contact Point (MCP), Sensorr

Specifications of 2-964296-1

• Product Type: Contact
• Mating Area Interface Dimensions (mm [in]): 2.79 x 0.81 [.110 x .032]
• Wire/cable Type: Regular Wire
• Insulation Support: With
• Wire Range (mm [awg]): 1.00-2.50² [17-13]
• Single Wire Sealing System: No
• Tab Type: Symmetric Cantilever Steel Spring
• Insulation Type: FLR (Thin Walled Cable)
• Contact Type: Tab
• Contact Base Material: CuFe2
• Contact Plating, Mating Area, Material: Pre-Tin
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Accepts Wire Insulation Diameter, Range (mm [in]): 2.21 – 3.00 [0.087 – 0.118]
• Applies To: Wire/Cable
• Packaging Method: Strip
• Packaging Quantity: 3,300

Housing Ass’y 6p Rec. & Tab Hybrid Jr. Power Timer / Multi Lock
Revisão “B”
ITEM
4.5.1
4.5.2
4.5.3
4.5.4
4.5.5
4.5.6
4.5
Dry Circuit Resistance
Visual Examination
Mechanical Shock
Connector and/or
Terminal Cycling
Heavy Duty Test
Test Requirements and Procedures Summary
Vibration
TEST
CONNECTOR ELECTRICAL TESTS
entire Mechanical Shock and Vibration with
There shall be no corrosion, discoloration,
Ohms for longer than 1µs, throughout the
tolerances specified on the part drawing.
metal apparent at the contact surface, or
temperature of +23 ± 5 ° C for at least 24
completion of the Vibration with Thermal
continuity, i.e., resistance greater than 7
For terminal size ≤2,8mm Junior Power
For terminal size ≤2,8mm Junior Power
physical distortion shall not exceed the
viewed under 10 to 40X magnification.
Test samples shall not have any base
t
For terminal size ≤1,5mm Multi Lock:
For terminal size ≤1,5mm Multi Lock:
functionality of the part. Swelling or
evidence of fretting corrosion, when
cracks, etc., which could affect the
of 50ºC maximum, during each cycle;
There shall be no loss of electrical
Store test samples at an ambient
Samples are evaluated only after
Timer: 5,0m , maximum.
Timer: 5,0m , maximum;
Thermal Cycling Tests;
Discontinued ≤7 /1µs;
15,0m , maximum;
8,0m , maximum;
REQUIREMENTS
Cycling Test.
Table 2
Item 4.5.1;
Item 4.5.3.
Item 4.5.1;
hours.
and functionally inspected
Acceleration (g) - Number
Acceleration (g) - Number
schedule" (acceleration of
20,9m/s² RMS) – duration
5 cycles: 5 hours of 80ºC,
or terminal pair 10 times.
discontinuities during the
(positive and negative) =
limits the current applied
resistance low level (dry
unmate each connector
circuit) before and after
Micro-ohmmeter which
(positive and negative)
Lock size 2,5mm²; and
To apply the profiles of
+85 a -40ºC in cycle of
Visually, dimensionally
Body (sprung masses)
Completely mate and
voltage to 20 mV and
14A for terminal Multi
per applicable quality
limits the open circuit
22,5A for terminal Jr.
5 cycles: 2 hours of -
Measure the contact
of shocks per axis,
of shocks per axis,
Power Timer size
40ºC, off current.
random vibration
Test Nº. 02: 100
PROCEDURES
inspection plan.
Test Nº. 01: 25
vibration and
temperature;
Monitoring of
480 minute.
to 100 mA.
Item 4.5.1;
the assay;
24h/eixo;
4,0mm².
assay;
= 18.
792;
108-37083
4 de 8