AD7829BRUZ Analog Devices Inc, AD7829BRUZ Datasheet - Page 9

• Manufacturer Part Number: AD7829BRUZ
• Description: IC ADC 8BIT 8CH 2MSPS 28TSSOP
• Manufacturer: Analog Devices Inc

Specifications of AD7829BRUZ

• Data Interface: Parallel
• Number Of Bits: 8
• Sampling Rate (per Second): 2M
• Number Of Converters: 1
• Power Dissipation (max): 36mW
• Voltage Supply Source: Single Supply
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 28-TSSOP (0.173", 4.40mm Width)
• Resolution (bits): 8bit
• Sampling Rate: 2MSPS
• Input Channel Type: Single Ended
• Supply Current: 8mA
• Digital Ic Case Style: TSSOP
• No. Of Pins: 28
• Number Of Elements: 1
• Resolution: 8Bit
• Architecture: Semiflash
• Sample Rate: 2MSPS
• Input Polarity: Unipolar
• Input Type: Voltage
• Rated Input Volt: 2/2.5V
• Differential Input: No
• Power Supply Requirement: Single
• Single Supply Voltage (typ): 3/5V
• Single Supply Voltage (min): 2.7V
• Single Supply Voltage (max): 5.5V
• Dual Supply Voltage (typ): Not RequiredV
• Dual Supply Voltage (min): Not RequiredV
• Dual Supply Voltage (max): Not RequiredV
• Power Dissipation: 36mW
• Differential Linearity Error: ±0.75LSB
• Integral Nonlinearity Error: ±0.75LSB
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 28
• Package Type: TSSOP
• Input Signal Type: Single-Ended
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Gain Error
The deviation of the last code transition (1111 . . . 110) to
(1111 . . . 111) from the ideal, that is, V
offset error has been adjusted out.
Gain Error Match
The difference in gain error between any two channels.
Track-and-Hold Acquisition Time
The time required for the output of the track-and-hold amplifier to
reach its final value, within ±1/2 LSB, after the point at which the
track-and-hold returns to track mode. This happens approximately
120 ns after the falling edge of CONVST .
REF
− 1 LSB, after the
Rev. C | Page 9 of 28
It also applies to situations where a change in the selected input
channel takes place or where there is a step input change on the
input voltage applied to the selected V
AD7825/AD7829. It means that the user must wait for the
duration of the track-and-hold acquisition time after a channel
change/step input change to V
conversion, to ensure that the part operates to specification.
PSR (Power Supply Rejection)
Variations in power supply affect the full-scale transition but
not the converter linearity. Power supply rejection is the
maximum change in the full-scale transition point due to a
change in power supply voltage from the nominal value.
AD7822/AD7825/AD7829
IN
before starting another
IN
input of the AD7822/