LTC1407CMSE-1 Linear Technology, LTC1407CMSE-1 Datasheet - Page 23

• Manufacturer Part Number: LTC1407CMSE-1
• Description: IC ADC 12BIT 3MSPS SAMPLE 10MSOP
• Manufacturer: Linear Technology

Specifications of LTC1407CMSE-1

• Number Of Bits: 12
• Sampling Rate (per Second): 3M
• Data Interface: Serial, SPI™
• Number Of Converters: 1
• Power Dissipation (max): 14mW
• Voltage Supply Source: Single Supply
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) Exposed Pad
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

APPLICATIONS INFORMATION
* 2’ cable from counter to CLK at DUT
*No right shift is needed to right justify the input data in the main program
*
*the two msbs should also be masked
*
*******************************************************************************************
*
Loopback
Format
IntSync
IntCLK
BurstMode
CLKDIV
PCM_Mode
FS_polarity
CLK_polarity
Frame_ignore
XMTautobuf
RCVautobuf
XMThalt
RCVhalt
XMTbufAddr
XMTbufSize
RCVbufAddr
RCVbufSize
*
* See notes in the ‘C54x CPU and Peripherals Reference Guide on setting up
* valid buffer start and length values. Page 9-44
*
*
**********************************************************************
<<5)) ,SPCval
1)<<7)|(Frame_ignore<<8)|(PCM_Mode<<9)), SPCEval
SPCEval
sineinit:
.eval ((Loopback >> 1)|((Format & 2)<<1)|(BurstMode <<3)|(IntCLK <<4)|(IntSync
.eval ((CLKDIV)|(FS_polarity <<5)|(CLK_polarity<<6)|((Format &
.eval (SPCEval|(XMTautobuf<<10)|(XMThalt<<12)|(RCVautobuf<<13)|(RCVhalt<<15)),
bspc = #SPCval
ifr = #10h
imr = #210h
intm = 0
bspce = #SPCEval
axr = #XMTbufAddr
bkx = #XMTbufSize
arr = #RCVbufAddr
bkr = #RCVbufSize
bspc = #(SPCval | GO)
return
.set
.set
.set
.set
.set
.set
.set
.set
.set
.set
.set
.set
.set
.set
.set
.set
.set
.set
NO
BIT_16
NO
NO
YES
3
NO
YES
NO
!YES
NO
YES
NO
NO
0x800
0x000
0x800
0x800
; places buffered serial port in reset
; clear interrupt fl ags
; Enable HPINT,enable BRINT0
; all unmasked interrupts are enabled.
; programs BSPCE and ABU
; initializes transmit buffer start address
; initializes transmit buffer size
; initializes receive buffer start address
; initializes receive buffer size
; bring buffered serial port out of reset
;for transmit and receive because GO=0xC0
;(digital looback mode?)
;(Data format? 16,12,10,8)
;(internal Frame syncs generated?)
;(internal clks generated?)
;(if BurstMode=NO, then Continuous) FSM bit
;(3=default value, 1/4 CLOCKOUT)
;(Turn on PCM mode?)
;(change polarity)YES=^^^\_/^^^, NO=___/^\___
;(change polarity)for BCLKR YES=_/^, NO=~\_
;(inverted
;(transmit autobuffering)
;(receive autobuffering)
;(transmit buff halt if XMT buff is full)
;(receive buff halt if RCV buff is full)
;(address of transmit buffer)
;(length of transmit buffer)
;(address of receive buffer)
;(length of receive buffer)works up to 800
!YES -ignores frame)
LTC1407-1/LTC1407A-1
DLB bit
TXM bit
MCM bit
FO bit
23
14071fb