4-647117-1 TE Connectivity, 4-647117-1 Datasheet - Page 3
![11P MTA100 HDR HT FL 30AU LF](/photos/41/48/414826/pr8205628b_sml.jpg)
4-647117-1
Manufacturer Part Number
4-647117-1
Description
11P MTA100 HDR HT FL 30AU LF
Manufacturer
TE Connectivity
Specifications of 4-647117-1
Connector Type
Header
Product Line
MTA-100
Pcb Mounting Orientation
Right Angle
Right Angle Bending Side
Front
Pcb Mount Retention
Without
Mating Connector Lock
With
Four Points Of Contact
Without
Shrouded
No
Mounting Ears
Without
Mating Connector Lock Type
Friction Lock
Post Size (mm [in])
0.64 [.025]
Panel Mount Retention
Without
Voltage Rating (vac)
250
Solder Tail Contact Plating
Matte Tin
Termination Post Length (mm [in])
3.18 [0.125]
Number Of Positions
11
Centerline (mm [in])
2.54 [0.100]
Narrow
No
Post Number(s) Omitted
None
Solder Tail Contact Material
Copper Alloy
Contact Type
Pin
Contact Shape
Square
Contact Plating, Mating Area, Material
Gold (30) or (30) Total Gold Flash over Palladium Nickel
Contact Base Material
Copper Alloy
Connector Style
Plug
Housing Color
Black
Mating Alignment
With
Ul Flammability Rating
UL 94V-0
Housing Material
Nylon 4/6
Backwall/post Interruption(s)
Without
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C, Reflow solder capable to 245°C, Reflow solder capable to 260°C, Pin-in-Paste capable to 245°C, Pin-in-Paste capable to 260°C
Rohs/elv Compliance History
Always was RoHS compliant
Applies To
Printed Circuit Board
Application Use
Wire-to-Board
Packaging Method
Tube
Vibration, sinusoidal.
Physical shock.
Durability.
Mating force.
Unmating force.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
Mixed flowing gas.
Rev H
NOTE
Test Description
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests as specified in Test Sequence in Figure 2.
No discontinuities of 1 microsecond
or longer duration.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
2 pounds maximum average per
contact.
0.8 pound minimum average per
contact.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
TE Spec 109-21-1.
Subject mated samples to 10-55-10
Hz traversed in 1 minute at .06 inch
total excursion. 2 hours in each of 3
mutually perpendicular planes.
TE Spec 109-26-1.
Subject mated samples to 50 G's
half-sine shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
TE Spec 109-27.
Manually mate and unmate
samples with friction lock header for
25 cycles.
TE Spec 109-42, Condition A.
Measure force necessary to mate
samples with friction lock header
from point of initial contact to depth
of .200 inch at maximum rate of .5
inch per minute.
TE Spec 109-42, Condition A.
Measure force necessary to unmate
samples from friction lock header at
maximum rate of .5 inch per minute.
TE Spec 109-22.
Subject mated samples to 25 cycles
between -55 and 105° C.
AMP Spec 109-23-3, Condition B.
Subject mated samples to 10 cycles
between 25 and 65° C at 95% RH.
AMP Spec 109-43.
Subject mated samples to
temperature life at 85° C for 1000
hours.
AMP Spec 109-85-3.
Subject mated samples to
environmental class III for 20 days.
Procedure
108-1050
3 of 9