406375-4 TE Connectivity, 406375-4 Datasheet - Page 3

• Manufacturer Part Number: 406375-4
• Description: 110 MJ ASSY, RJ11
• Manufacturer: TE Connectivity
• Series: 110Connectr

Specifications of 406375-4

• Product Type: Connector - Modular
• Jack Type: RJ11 / RJ14 / RJ25
• Wiring Pattern: USOC
• Termination Style: 110 Style Punch-Down
• Keyed: No
• Performance Category: Cat 3
• Stuffer Cap Material: Polyphenylene Oxide
• Stuffer Cap Color: Gray
• Shielded: No
• Solder Tail Contact Plating: Tin-Lead over Nickel
• Number Of Positions: 6
• Netconnect Select System: No
• Conductor O.d. (mm [in]): 1.27 [0.050]
• Mount Type: Panel Mount
• Wire Range (solid) (mm [awg]): 22-26
• Wire Range (stranded) (mm² [awg]): 20-26
• 110 Block Material: Polycarbonate
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold
• Contact Plating, Mating Area, Thickness (µm [?in]): 1.27 [50]
• Housing Color: NEMA Gray
• Housing Material: Polyphenylene Oxide
• Ul Flammability Rating: UL 94V-0
• Dust Cover: Without
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C
• Rohs/elv Compliance History: Converted to comply with RoHS directive
• Packaging Method: Poly Bag
• Packaging Quantity: 25

Rev B
Dielectric withstanding voltage.
Insulation resistance.
Sinusoidal vibration.
Plug retention in jack.
Mechanical shock.
Mating force.
Unmating force.
Durability.
Test Description
1 kvac dielectric withstanding
voltage.
1 minute hold.
1 milliampere maximum leakage
current. No breakdown or flashover.
500 megohms minimum final.
No discontinuities greater than 1
microsecond.
See Note.
Plug shall not dislodge from jack.
No discontinuities greater than 1
microsecond.
See Note.
5 pounds maximum.
5 pounds maximum.
Termination resistance dry circuit
final.
See Note.
Figure 1 (continued)
MECHANICAL
Requirement
TE Spec 109-29-1.
Test between adjacent contacts of
jack and mated plug assembly.
TE Spec 109-28-3.
Test between adjacent contacts of
jack and mated plug assembly.
TE Spec 109-21-1.
Subject jack and mated plug
assembly to 10 to 55 Hz traversed
in 1 minute at .06 inches total
excursion. 15 minutes in each of 3
mutually perpendicular planes.
TE Spec 109-50.
Apply axial load of 20 pounds to
plug housing at rate of .5 inch per
minute with plug mated in jack and
latch engaged.
TE Spec 109-26-1.
Subject mated jack and plug
assembly to 50 G's half-sine shock
pulses of 11 milliseconds duration.
3 shocks applied along 3 mutually
perpendicular planes, 18 total
shocks.
TE Spec 109-42, Condition A.
Measure force necessary to mate
plug and jack with plug latch
depressed at a rate of .5 inch per
minute.
TE Spec 109-42, Condition A.
Measure force necessary to
unmate plug and jack with plug
latch depressed at a rate of .5 inch
per minute.
TE Spec 109-27.
Mate and unmate plug and jack for
750 cycles at a maximum rate of
500 cycles per hour with latch
inoperative.
Procedure
108-1389
3 of 6