6-6318154-1 TE Connectivity, 6-6318154-1 Datasheet - Page 3

• Manufacturer Part Number: 6-6318154-1
• Description: .6FHP08H,320,B,GIG,08/SN,ST,SEYES
• Manufacturer: TE Connectivity

Specifications of 6-6318154-1

• Product Type: Connector
• Pcb Mounting Orientation: Vertical
• Keyed: Yes
• Sealant: With
• Industry Application: Board-to-Board (Personal Systems/Computers)
• Board-to-board Stack Height (mm [in]): 8.00 [0.315]
• Centerline (mm [in]): 0.60 [0.024]
• Number Of Positions: 320
• Grounding Plate: With
• Grounding Contact: With
• Locating Post(s): With
• Vacuum Cover: With
• Family Name: Free Height
• Contact Layout: In-Line
• Contact Base Material: Copper Alloy
• Preloaded: Yes
• Contact Plating, Mating Area, Material: Gold (8)
• Connector Style: Plug
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• Packaging Method: Soft Tray
• Region: Asia/Pacific

ASHL-0005- ES REV A
3.5 Test Requirements and Procedures Summary:
Para.
3.5.1
3.5.2
3.5.3
3.5.4
3.5.5
3.5.6
3.5.7
Confirmation of
Product
Termination Resistance
(Low Level)
Dielectric withstanding
Voltage
Insulation Resistance
Capacitance
Connector Mating
Force
Contact Unmating
Force
AMP Shanghai Ltd
Tyco Electronics
Test Items
Product shall be conforming to
the requirements of applicable
product drawing and
Application Specification.
55 m Max. (Initial)
No creeping discharge nor
flashover shall occur.
Current leakage: 5 mA Max.
500 M Min. (Initial)
100 M Min. (Final)
5 p F Max.
0.9 N (90 gf) Max. per contact
0.1 N (10 gf) min per contact.
Fig. 2 (To be continued)
R=20 m Max. (Final)
Electrical Requirements
Requirements
PAGE NO
3
108-60047
Visually, dimensionally and
functionally inspected per
applicable quality inspection plan.
Subject mated contacts assembled
in housing to 20 mV Max. open
circuit at 10 mA.
Fig. 1
AMP Spec. 109-5311-1
0.2 k VAC for 1 minute.
Test between adjacent circuits of
mated connectors.
AMP Spec. 109-5301
Impressed voltage 500 V DC.
Test between adjacent circuits of
mated connectors.
AMP Spec. 109-5302
Test between the adjacent circuits
of mated connector.
MIL-STD-202 Method 305
1 kHz
Operation Speed: 100mm/min.
Measure the force required to mate
connectors.
AMP Spec. 109-5206
Operation Speed: 100 mm/min.
Measure the force required to
unmate connectors.
AMP Spec. 109-5206
Procedures
REV LOC
O
ES