63942-1 TE Connectivity, 63942-1 Datasheet - Page 5

• Manufacturer Part Number: 63942-1
• Description: RCPT,187 FL/FAST/AMVR 0157TPBR
• Manufacturer: TE Connectivity

Specifications of 63942-1

• Rohs Compliant: YES
• Product Type: Terminal
• Terminal Type: Receptacle
• Mating Area Interface Dimensions (mm [in]): 4.75 x 0.51 [.187 x .020]
• Receptacle Style: Flag
• Insulation Support: Insulation Support
• Wire/cable Type: Magnet Wire
• Insulation Diameter (mm [in]): 0.51-1.02 [.020-.040]
• Insertion Force: Normal
• Finish: Tin
• Crimp Type: F-Crimp
• Proprietary Name: AMPLIVAR
• Board Mount: No
• Weld Tab: Without
• Wire Range (mm [awg]): 0.57-0.72 [23-21]
• Stock Thickness (mm [in]): 0.41 [0.016]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Strip

4.2.
4.3.
4.4.
Rev D
Requalification Testing
If changes significantly affecting form, fit or function are made to the product or manufacturing
process, product assurance shall coordinate requalification testing, consisting of all or part of the
original testing sequence as determined by development/product, quality and reliability engineering.
Acceptance
Acceptance is based on verification that the product meets the requirements of Figure 1. Failures
attributed to equipment, test setup or operator deficiencies shall not disqualify the product. If product
failure occurs, corrective action shall be taken and specimens resubmitted for qualification. Testing to
confirm corrective action is required before resubmittal.
Quality Conformance Inspection
The applicable quality inspection plan shall specify the sampling acceptable quality level to be used.
Dimensional and functional requirements shall be in accordance with the applicable product drawing
and this specification.
Low Level Contact Resistance Measurement Points
Figure 3
108-2086
5 of 6