640706-1 TE Connectivity, 640706-1 Datasheet - Page 2

• Manufacturer Part Number: 640706-1
• Description: CONTACT, RECEPTACLE, 24-18AWG, CRIMP
• Manufacturer: TE Connectivity

Specifications of 640706-1

• Peak Reflow Compatible (260 C): No
• Terminal Type: Wire Crimp
• Mating Force: High
• Wire Size (awg): 24-18
• Leaded Process Compatible: No
• Connecting Termination: Crimp
• Rohs Compliant: No
• Termination Method To Wire/cable: Crimp
• Wire Size (mm² [awg]): 0.9-0.2² [18-24]
• Used For: SL-156 Housings
• Wire Insulation Diameter (mm [in]): 2.79 [0.110]
• Unmating Force: High
• Contact Configuration: SL-156 Contacts
• Contact Plating, Mating Area, Material: Bright Tin
• Contact Base Material: Brass
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Packaging Method: Loose Piece

3.3.
3.4.
3.5.
Examination of product.
Termination resistance, specified
current.
Termination resistance, dry circuit.
Insulation resistance.
Dielectric withstanding voltage.
Temperature rise vs current.
Rev H
Ratings
!
!
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per Test Specification 109-1.
Test Requirements and Procedures Summary
Test Description
Voltage: 250 volts AC
Current: 6.5 amperes maximum
Temperature: -55 to 105°C
NOTE
The maximum rated current that can be carried by this product is limited by the
maximum operating temperature of the housings (105°C) and the temperature rise of the
contacts (30°C). Variables which shall be considered for each application are: wire size;
contact material; ambient temperature; and PCB design.
Meets requirements of product
drawing and Application
Specification 114-1021.
3 milliohms maximum initial.
1000 megohms minimum initial.
100 megohms minimum final.
One minute hold with no breakdown
or flashover.
30°C maximum temperature rise at
specified current.
(AWG) (amperes) (max initial)
Wire
Size
24
22
20
18
Figure 1 (continued)
ELECTRICAL
Current
Requirement
Test
1.5
3.0
4.5
6.0
Resistance
(milliohms
4.00
3.75
3.50
3.00
Visual, dimensional and functional
per applicable inspection plan.
TE Spec 109-25.
Measure potential drop of specimen
mated with .045 inch posts on PCB.
Calculate resistance.
See Figure 3.
TE Spec 109-6, Condition A.
Subject specimens to 50 millivolts
open circuit voltage at 100
milliamperes maximum.
See Figure 3.
TE Spec 109-28-4.
Test between adjacent circuits of
unmated specimens.
TE Spec 109-29-1.
2000 volts AC at sea level.
Test between adjacent circuits of
unmated specimens.
TE Spec 109-45.
Measure temperature rise at rated
current.
See Figure 4.
Procedure
108-1049
2 of 6