748610-8 TE Connectivity, 748610-8 Datasheet - Page 4

• Manufacturer Part Number: 748610-8
• Description: CONT,HD22 CS SCKT
• Manufacturer: TE Connectivity

Specifications of 748610-8

• Rohs Compliant: YES
• Product Type: Contact
• Product Series: HDP-22 (Crimp Snap)
• Termination Method To Wire/cable: Crimp
• Wire Insulation Diameter (mm [in]): 0.76 – 1.02 [0.030 – 0.040]
• Insulation Support: Yes
• Grade: Standard
• Contact Retention In Housing: Crimp Snap-In
• Solder Tail Contact Plating: Gold (50)
• Wire Range (mm² [awg]): 0.08 - 0.40 [28-22]
• Contact Type: Socket
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (50)
• Contact Size: 22
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Strip
• Packaging Quantity: 20,000/Reel

Durability.
Thermal shock.
Humidity/temperature cycling.
Industrial mixed flowing gas.
Temperature life.
Rev B
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
2.
See Note.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
TE Spec 109-27.
Mate and unmate specimens for
number of cycles indicated at a
maximum rate of 200 cycles per
hour.
TE Spec 109-22.
Subject mated specimens to 5
cycles between -55 and 105°C.
TE Spec 109-23-4, Condition B.
Subject mated specimens to 10
humidity/temperature cycles
between 25 and 65°C at 95% RH.
TE Spec 109-85-3.
Subject mated specimens to
environmental class III for 20 days.
TE Spec 109-43.
Subject mated specimens to
temperature life at 105°C for 500
hours.
(30 μin total thickness)
palladium-nickel
Gold flash over
Plating Type
30 μin gold
Gold flash
Procedure
Cycles
100
500
108-1268
500
4 of 8