SX1239IMLTRT Semtech, SX1239IMLTRT Datasheet - Page 29

• Manufacturer Part Number: SX1239IMLTRT
• Description: IC, RF RECEIVER, 1.02GHz, QFN-24
• Manufacturer: Semtech

Specifications of SX1239IMLTRT

• Applications: Wireless Sensor Networks, Automated Meter Reading, Home And Building Automation
• Receiving Current: 16mA
• Data Rate: 300Kbps
• Modulation Type: FSK, OOK
• Sensitivity Dbm: -120dBm
• Rohs Compliant: Yes
• Rf Ic Case Style: QFN
• No. Of Pins: 24
• Sensitivity (dbm): -120dBm
• Supply Voltage Range: 1.8V To 3.6V
• Operating Temperature Range: -40°C To +85°C
• Lead Free Status / Rohs Status: Supplier Unconfirmed

3.4.18. Temperature Sensor
When temperature is measured, the receiver ADC is used to digitize the sensor response. Most receiver blocks are
disabled, and temperature measurement can only be triggered in Standby or Frequency Synthesizer modes.
The response of the temperature sensor is -1°C / Lsb. A CMOS temperature sensor is not accurate by nature, therefore it
should be calibrated at ambient temperature for precise temperature readings.
It takes less than 100 microseconds for the SX1239 to evaluate the temperature (from setting TempMeasStart to 1 to
TempMeasRunning reset).
3.4.19. Timeout Function
The SX1239 includes a Timeout function, which allows it to automatically shut-down the receiver after a receive sequence
and therefore save energy.
This timeout interrupt can be used to warn the companion processor to shut down the receiver and return to a lower power
mode.
Rev 3 - Jan 2011
ADVANCED COMMUNICATIONS & SENSING
Timeout interrupt is generated TimeoutRxStart x 8 x Tbit after switching to RX mode if RssiThreshold flag does not raise
within this time frame
Timeout interrupt is generated TimeoutRssiThresh x 8 x Tbit after RssiThreshold flag has been raised.
Returns 150d (typ.)
Needs calibration
TempValue(t)-1
TempValue(t)
TempValue
Figure 13. Temperature Sensor Response
-40
°
C
t t+1
-1
°
Page 29
C/Lsb
Ambient
+85
°
C
DATASHEET
www.semtech.com
SX1239